1983 Ford Ranger Drive Shaft
Navigate our online catalogue to find original replacement Drive Shafts specifically designed to fit a 1983 Ford Ranger.
Drive Shaft
$456.14 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 4;
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 4;
Vehicle Fitment Notes:
Short Wheelbase with 44.21" (1123 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Short Wheelbase with 44.21" (1123 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Drive Shaft
$456.14 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 4;
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 44.21 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 44.21 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Drive Shaft
$456.14 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Automatic;
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
Short Wheelbase with 44.21" (1123 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Short Wheelbase with 44.21" (1123 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Drive Shaft
$456.14 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Automatic;
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 44.21 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 44.21 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Drive Shaft
$456.14 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual; Transmission Speeds: 4;
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual; Transmission Speeds: 4;
Vehicle Fitment Notes:
Short Wheelbase with 44.21" (1123 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Short Wheelbase with 44.21" (1123 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Drive Shaft
$456.14 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual; Transmission Speeds: 4;
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 44.21 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 44.21 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Drive Shaft
$513.25 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
Short Wheelbase with 42.28" (1074 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Short Wheelbase with 42.28" (1074 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Drive Shaft
$513.25 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 42.28 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 42.28 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Drive Shaft
$513.25 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
Short Wheelbase with 42.28" (1074 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Short Wheelbase with 42.28" (1074 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Drive Shaft
$513.25 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 42.28 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 42.28 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Drive Shaft
$1,163.62 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual; Transmission Speeds: 5; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual; Transmission Speeds: 5; Wheel Base: 289.6cm (114.0in.);
Drive Shaft
$1,163.62 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Transmission Control Type: Manual; Transmission Speeds: 4; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Transmission Control Type: Manual; Transmission Speeds: 4; Wheel Base: 289.6cm (114.0in.);
Vehicle Fitment Notes:
10 Bolt Differential Cover 7.5 In. Ring Gear
10 Bolt Differential Cover 7.5 In. Ring Gear
Drive Shaft
$651.09 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Vehicle Fitment Notes:
ID No. E57A
ID No. E57A
Drive Shaft Assembly
$611.06 CAD
In Stock
Condition: New
Ships: Wednesday Dec. 3rd
Pick-Up: Ready in 2-4 Hours Wednesday Dec. 3rd
Pick-Up: Ready in 2-4 Hours Wednesday Dec. 3rd
Rear
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
With 44 1/4" Prop Shaft
With 44 1/4" Prop Shaft
Drive Shaft Assembly
$611.06 CAD
In Stock
Condition: New
Ships: Wednesday Dec. 3rd
Pick-Up: Ready in 2-4 Hours Wednesday Dec. 3rd
Pick-Up: Ready in 2-4 Hours Wednesday Dec. 3rd
Rear
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5);
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5);
Vehicle Fitment Notes:
With 44 1/4" Prop Shaft
With 44 1/4" Prop Shaft
Drive Shaft Assembly
$615.82 CAD
In Stock
Condition: New
Ships: Wednesday Dec. 3rd
Pick-Up: Ready in 2-4 Hours Wednesday Dec. 3rd
Pick-Up: Ready in 2-4 Hours Wednesday Dec. 3rd
Rear
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual;
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual;
Vehicle Fitment Notes:
With 42 5/16" Prop Shaft
With 42 5/16" Prop Shaft
Drive Shaft Assembly
$615.82 CAD
In Stock
Condition: New
Ships: Wednesday Dec. 3rd
Pick-Up: Ready in 2-4 Hours Wednesday Dec. 3rd
Pick-Up: Ready in 2-4 Hours Wednesday Dec. 3rd
Rear
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual;
Engine Base: 2.8L 171ci V6 (3.66x2.71; 93.0x68.5); Transmission Control Type: Manual;
Vehicle Fitment Notes:
With 42 5/16" Prop Shaft
With 42 5/16" Prop Shaft