Cardone Select 55-13130 Engine Water Pump

Cardone Select 5513130 Engine Water Pump product image 3 of 3

New Water Pump

$82.03$49.37 CAD

Out of Stock

Brand: Cardone Select

Stock #: 5513130

Condition: New

UPC: 082617648578

Weight: 2.01 lb.(0.91 kg.)

Dimensions: 8" x 6.1" x 5.4" (20.3 cm x 15.4 cm x 13.7 cm)

Accepted Payments: Visa, MasterCard, PayPal

30-Day Return Policy

DuraGo 29520100
MOOG Chassis Products 520100
Parts Master PM520100
Fenco WH520100
Rayloc PBR930152K
GMB 7250240
MPA WH520100
WJB WA520100
Pilot HB520100
CRS Automotive NT521000
DuraGo 29520100
GMB 7250240

Product Condition	New
FAQs	After mounting the pump on the vehicle and running the engine, the shaft broke. The shaft was blue. Does this mean the pump burned up?
FAQs	The pump did not burn up, however the shaft broke due to a stress fracture caused by: Excessively high temperatures, Improperly torqued mounting bolts, Bent or distorted pulley(s), Cracked fan bent, not mounted squarely, Defective fan clutch, improperly tightened belt(s)
FAQs	I just replaced the water pump and my engine is overheating. Is the pump defective?
FAQs	The engine overheating could be due to components other than the water pump. The following steps should be taken before checking the pump. Flush the system. Check hoses, clamps and seals. Check radiator cap and thermostat. Check for proper and sufficient coolant. Check for cracks, warpage and other damage.
FAQs	Do I need identification off of the original pump to get the correct replacement?
FAQs	For most modern vehicles, knowing the engine size is sufficient to locate the correct replacement water pump. However, with some older passenger vehicles and medium duty applications, you may need an identification number that is either stamped on the original casting or attached on a metal tag. You may also need a specific dimension off of the original pump to correctly identify the replacement pump. Always refer to the catalog for details on how to correctly identify the water pump for your application.
FAQs	The impeller on my original pump looks pitted. Is this caused by cavitation?
FAQs	Yes, the mostly likely cause is cavitation. When inlet pressures of a water pump fall below the design specifications due to a leak or inadequate coolant levels, tiny vapor bubbles can form in the coolant at the center of the impeller. When coolant containing these bubbles is forced into a high-pressure environment on the other side of the impeller, these bubbles collapse, creating tiny shock waves and points of high temperature. These shock waves can lead to surface corrosion on the impeller over time. To prevent cavitation, be sure the cooling system is operating at the correct coolant level and pressure.
Features and Benefits	100% leak testing and hub-pull testing ensures reliable performance.
Features and Benefits	O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
Features and Benefits	The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
Features and Benefits	Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).
Package Contents	Water Pump, Gaskets
Gaskets Included	Yes
Material	Aluminum
Pulley Included	No
Number of Hose Connectors	0
Hub Height (in)	3.15
Hub Height (mm)	80.01
Impeller Vane Quantity	7
Rotation	Counter-Clockwise
Mounting Hardware Included	No
Duty Rating	Standard
E-Waste	No
UPC	082617648578
Origin Country:	CN
Weight:	2.01Lb. (0.91 kg.)
Package Dimensions:	8" x 6.1" x 5.4" (20.3 cm x 15.4 cm x 13.7 cm)