A1 Cardone 60-7220 CV Axle Shaft

Remanufactured Constant Velocity Drive Axle

$99.80 CAD

Core charge: $21.00

Out of Stock

(Obsolete)

Brand: A1 Cardone

Stock #: 607220

Condition: Remanufactured

UPC: 082617506663

Weight: 10.13 lb.(4.61 kg.)

Dimensions: 29.5" x 5" x 5" (74.9 cm x 12.7 cm x 12.7 cm)

Accepted Payments: Visa, MasterCard, PayPal

30-Day Return Policy

CARDONE's extensive experience in testing and engineering CV Drive Axles is the foundation behind our proprietary method of engineering a product that meets and even exceed O.E. performance. We have researched the reasons why original CVs typically fail and designed new solutions to avoid repeat failure. For example, our Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and ozone cracking - the leading cause of boot failure. Additionally, all CV Drive Axle shafts are individually verified for straightness, resulting in vibration-free performance at all speeds.

Product Condition	Remanufactured
FAQs	Are the CV Drive Axle shafts balanced at the factory?
FAQs	Shafts are inspected 100% for run out to prevent vibrations.Â Only shafts that meet the specifications for run out are utilized in the remanufacturing of a CV Drive Axle assembly.
FAQs	I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?
FAQs	When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.
FAQs	When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?
FAQs	The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.
FAQs	When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?
FAQs	The most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up.
FAQs	I hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this?
FAQs	The most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint.
FAQs	I removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do?
FAQs	The transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time.
FAQs	The old CV Drive Axle has a locking style (prevailing torque) nut.Â Should I reuse it?
FAQs	NO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one.
FAQs	The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it?
FAQs	Always use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly.
FAQs	Is it OK to use an impact hammer to install the retaining nut?
FAQs	Never use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications.
FAQs	When I replace the CV drive axles, should I reuse the old seals?
FAQs	When replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking.
FAQs	Can I let the CV Drive Axles hang while I am working on the car?
FAQs	Never allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint.
FAQs	The wheels wobble when I make a turn. What's the problem?
FAQs	The most likely cause is a broken bearing cage due to excessive torque load.Â This is typically an outboard joint problem.
Features and Benefits	Neoprene boots ensure excellent environmental stress resistance, which eliminates cracking - a leading cause of boot failure.
Features and Benefits	Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
Features and Benefits	High-quality grease withstands high-temperature and pressure extremes, which extends joint life.
Features and Benefits	High-tech grinding machines maintain the original design of the outer housing, race and cage to guarantee reliable performance.
Features and Benefits	CV Drive Axle shafts are inspected for run out to prevent vibration.
Features and Benefits	CV Drive Axle is measured after assembly to ensure proper fit.
Features and Benefits	Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles.
Features and Benefits	Threads are chased to ensure proper fit of the new retaining nut supplied with each CV Drive axle.
Compressed Length	22 1/8"
ABS Ring Included	No
Input Shaft Connection Style	Spline
Input Shaft Spline Count	23
Output Shaft Connection Style	Spline
Output Shaft Spline Count	24
Spindle Nut Included	No
E-Waste	No
UPC	082617506663
Origin Country:	MX
Weight:	10.13Lb. (4.61 kg.)
Package Dimensions:	29.5" x 5" x 5" (74.9 cm x 12.7 cm x 12.7 cm)