A1 Cardone 58-196 Engine Water Pump

Remanufactured Water Pump

$55.63 CAD

Core charge: $3.50

Out of Stock

(Obsolete)

Brand: A1 Cardone

Stock #: 58196

Condition: Remanufactured

UPC: 082617052870

Weight: 8.85 lb.(4.03 kg.)

Dimensions: 11.9" x 7.6" x 7.1" (30.2 cm x 19.4 cm x 18.1 cm)

Accepted Payments: Visa, MasterCard, PayPal

30-Day Return Policy

CARDONEÂ© Remanufactured Water Pumps are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-supplied unitized seals and application-specific bearings to ensure long-lasting, trouble-free product life. With 100% leak and hub-pull testing, CARDONE Remanufactured Water Pumps provide peace of mind for the long haul.

Product Condition	Remanufactured
FAQs	After mounting the pump on the vehicle and running the engine, the shaft broke. The shaft was blue. Does this mean the pump burned up?
FAQs	The pump did not burn up, however the shaft broke due to a stress fracture caused by: Excessively high temperatures, Improperly torqued mounting bolts, Bent or distorted pulley(s), Cracked fan bent, not mounted squarely, Defective fan clutch, improperly t
FAQs	I just replaced the water pump and my engine is overheating. Is the pump defective?
FAQs	The engine overheating could be due to components other than the water pump. The following steps should be taken before checking the pump. Flush the system. Check hoses, clamps and seals. Check radiator cap and thermostat. Check for proper and sufficient
FAQs	Do I need identification off of the original pump to get the correct replacement?
FAQs	For most modern vehicles, knowing the engine size is sufficient to locate the correct replacement water pump. However, with some older passenger vehicles and medium duty applications, you may need an identification number that is either stamped on the ori
FAQs	The impeller on my original pump looks pitted. Is this caused by cavitation?
FAQs	Yes, the mostly likely cause is cavitation. When inlet pressures of a water pump fall below the design specifications due to a leak or inadequate coolant levels, tiny vapor bubbles can form in the coolant at the center of the impeller. When coolant conta
Features and Benefits	100% leak testing and hub-pull testing ensures reliable performance.
Features and Benefits	O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
Features and Benefits	The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
Features and Benefits	Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).
Package Contents	Water Pump, Gaskets
Gaskets Included	Yes
Material	Aluminum, Cast Iron, Steel
Pulley Included	No
Number of Hose Connectors	3
Hub Height (in)	4.7
Hub Height (mm)	119.46
Impeller Vane Quantity	8
Rotation	Clockwise
Mounting Hardware Included	No
Duty Rating	Standard
E-Waste	No
Casting Number	2951331, 2402794
UPC	082617052870
Origin Country:	MX
Weight:	8.85Lb. (4.03 kg.)
Package Dimensions:	11.9" x 7.6" x 7.1" (30.2 cm x 19.4 cm x 18.1 cm)