A1 Cardone 20-880 Power Steering Pump in Canada

Buyer fitment guide only intended as reference. Please use catalogue search by vehicle to ensure proper fitment.

Ingalls Engineering CAK80408
Transbec K80428
Xpress Automotive Supplies XK80428
MOOG Chassis Products CK80428
Dorman 520-134
Falcon K80428
TRW Steering and Suspension Parts JTC1532
Ingalls Engineering CAK80428
Ingalls Engineering IK80428
OEM Part Number 22626332
MOOG Chassis Products K80446
Transbec K80446
Transbec TK80446
MAS Industries CB90243
MAS Industries CB90213
OEM Part Number 22625029
OEM Part Number 22602164
OEM Part Number 22606709
Xpress Automotive Supplies XK80446
Dorman 520-133
Falcon K80446
Raybestos Chassis 5071332
TRW Steering and Suspension Parts JTC1539
MOOG Chassis Products RK80446
Ingalls Engineering CAK80446
Ingalls Engineering IK80446
OEM Part Number 22710851
Deeza VWH130
MOOG Chassis Products K80524
Transbec 10980524
Transbec TK80524
Dorman 520133
Dorman 520134
Buick 26002724
Oldsmobile 26002724
Buick 26004881
Buick 26008768
Buick 26010679
Buick 26011973
Buick 26014395
Buick 26022286
Buick 26025515
Buick 7848110
Oldsmobile 26004881
Oldsmobile 26008768
Oldsmobile 26010679
Oldsmobile 26011973
Oldsmobile 26014395
Oldsmobile 26022251
Oldsmobile 26022286
Oldsmobile 7848110
Pontiac 26002724
Pontiac 26004881
Pontiac 26011973
Pontiac 26014395
Buick 26001660
Buick 26001661
Buick 26006649
Buick 26022753
Buick 7844280
Buick 7847616
Buick 7849440
Cadillac 26002724
Cadillac 26006703
Cadillac 7844280
Cadillac 7847616
Oldsmobile 26001660
Oldsmobile 26001661
Oldsmobile 26006649
Oldsmobile 26022753
Oldsmobile 7844280
Oldsmobile 7847616
Pontiac 26001660
Pontiac 26001661
Pontiac 26022753
Pontiac 7844280
Pontiac 7847616
Pontiac 7849440
MOOG CK80428
MOOG RK80446

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.

Outlet Thread Size	16x1.5
Pulley Belt Type	Serpentine
Package Contents	Hydraulic Pump; Instruction Sheet; Sealing Kit
Product Condition	Remanufactured
E-Waste	No
Prop 65	No
SDS Required	No
Contains Electronic Components?	No
Is item a chemical?	No
Is or contains a battery?	No
Is or contains a bulb?	No
Is the item CARB affected?	No
FAQ_Q1	Why is the pump making a whining noise all of the time?
FAA_A1	A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.
FAQ_Q2	Why do I still have hard steering in one direction after I replaced the pump?
FAA_A2	The problem is most likely in the steering unitâˆ’the pump does not know left from right. Check for binding steering components and repair as necessary.
FAQ_Q3	I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
FAA_A3	The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQ_Q4	I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAA_A4	There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.
FAQ_Q5	Should I ever change my fluid, even though nothing is wrong?
FAA_A5	Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
UPC	082617057707
Origin Country:	MX
Weight:	4.76Lb. (2.17 kg.)
Package Dimensions:	4.5" x 4.1" x 7.3" (11.4 cm x 10.5 cm x 18.4 cm)

1 Year Warranty

A1 Cardone 20-880 Power Steering Pump

Remanufactured Power Steering Pump