A1 Cardone 19P2977A Disc Brake Caliper

BRAKE CALIPER

$162.74 CAD

Core charge: $78.30

Out of Stock

Brand: A1 Cardone

Stock #: 19P2977A

Condition: Remanufactured

Made in USA

Weight: 6.5 lb.(2.96 kg.)

Dimensions: 9.6" x 7.4" x 5.3" (24.4 cm x 18.7 cm x 13.3 cm)

Accepted Payments: Visa, MasterCard, PayPal

30-Day Return Policy

Volkswagen 1K0615424M

Product Condition	Remanufactured
FAQs	Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQs	Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturerâ€™s recommendations.
FAQs	What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQs	As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQs	Car pulls to one side during braking. Why?
FAQs	Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQs	Brakes squeal all of the time. What's causing the squeal?
FAQs	Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQs	Could calipers be the cause of a low brake pedal?
FAQs	A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQs	What type of grease is used on floating caliper mounting pins?
FAQs	A silicone grease is used on floating caliper mounting pins.
FAQs	Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQs	New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
Features and Benefits	Pistons are durable, resistant to cracking or pitting and handle great loads.
Features and Benefits	Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Features and Benefits	Mounting bracket is included where applicable for a hassle-free installation.
Features and Benefits	Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
Features and Benefits	New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and Benefits	New bleeder screws provide trouble-free bleeding and a positive seal.
Features and Benefits	New washers are included where applicable for a proper seal.
Features and Benefits	A plastic cap plug protects every brake port thread to ensure trouble-free installation.
Features and Benefits	New stainless steel hardware clips and new mounting pins are included where applicable.
Features and Benefits	As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits	Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Brake Caliper Finish	Powder Coated
Piston Quantity	1
Caliper Color	Silver
Installation Hardware Included	Yes
Package Contents	Caliper; Instruction Sheet; Bracket; Hardware Kit
Bleeder Port Size	M10x1.0
Inlet Port Size	0.472
Piston Material	Steel
Piston Size (OD) (in)	1.614
Pads Included	No
Mounting Bolts Included	No
E-Waste	No
Origin Country:	US
Weight:	6.5Lb. (2.96 kg.)
Package Dimensions:	9.6" x 7.4" x 5.3" (24.4 cm x 18.7 cm x 13.3 cm)