2013 Volkswagen Jetta Rack and Pinion Assemblies
Save up to 40% on original replacement 2013 Volkswagen Jetta Rack and Pinion Assemblies. Navigate our online catalogue to find Rack and Pinion Assemblies and other parts designed specifically to fit a 2013 Volkswagen Jetta.
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Body Type: Sedan; Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SE;
Body Type: Sedan; Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SE;
Vehicle Fitment Notes:
Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Body Type: Sedan; Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SE;
Body Type: Sedan; Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SE;
Vehicle Fitment Notes:
with Hydraulic Power Includes Inner Tie Rods For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
with Hydraulic Power Includes Inner Tie Rods For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8); Sub-Model: S;
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8); Sub-Model: S;
Vehicle Fitment Notes:
Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8); Sub-Model: S;
Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8); Sub-Model: S;
Vehicle Fitment Notes:
with Hydraulic Power Includes Inner Tie Rods For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
with Hydraulic Power Includes Inner Tie Rods For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SEL;
Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SEL;
Vehicle Fitment Notes:
Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Includes Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SEL;
Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SEL;
Vehicle Fitment Notes:
with Hydraulic Power Includes Inner Tie Rods For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
with Hydraulic Power Includes Inner Tie Rods For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Aspiration: Turbocharged; Engine Base: 1.4L 1395cc 85ci L4 (2.93x3.15; 74.5x80.0); Fuel Type: FULL HYBRID EV-GAS (FHEV);
Aspiration: Turbocharged; Engine Base: 1.4L 1395cc 85ci L4 (2.93x3.15; 74.5x80.0); Fuel Type: FULL HYBRID EV-GAS (FHEV);
Vehicle Fitment Notes:
Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Aspiration: Turbocharged; Engine Base: 1.4L 1395cc 85ci L4 (2.93x3.15; 74.5x80.0); Fuel Type: FULL HYBRID EV-GAS (FHEV);
Aspiration: Turbocharged; Engine Base: 1.4L 1395cc 85ci L4 (2.93x3.15; 74.5x80.0); Fuel Type: FULL HYBRID EV-GAS (FHEV);
Vehicle Fitment Notes:
Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Aspiration: Turbocharged; Engine Base: 2.0L 1968cc (120CID) L4 Bore 81.0cm (3.19in.) Stroke 95.5cm (3.76in.);
Aspiration: Turbocharged; Engine Base: 2.0L 1968cc (120CID) L4 Bore 81.0cm (3.19in.) Stroke 95.5cm (3.76in.);
Vehicle Fitment Notes:
Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Aspiration: Turbocharged; Engine Base: 2.0L 1968cc (120CID) L4 Bore 81.0cm (3.19in.) Stroke 95.5cm (3.76in.);
Aspiration: Turbocharged; Engine Base: 2.0L 1968cc (120CID) L4 Bore 81.0cm (3.19in.) Stroke 95.5cm (3.76in.);
Vehicle Fitment Notes:
Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Aspiration: Turbocharged; Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Aspiration: Turbocharged; Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Aspiration: Turbocharged; Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Aspiration: Turbocharged; Engine Base: 2.0L 1984cc 121ci L4 (3.25x3.65; 82.5x92.8);
Vehicle Fitment Notes:
Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Body Type: Wagon; Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SE;
Body Type: Wagon; Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SE;
Vehicle Fitment Notes:
Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Body Type: Wagon; Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SE;
Body Type: Wagon; Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: SE;
Vehicle Fitment Notes:
Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: S;
Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: S;
Vehicle Fitment Notes:
Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Includes Inner Tie Rods with Electronic Power Assist Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: S;
Engine Base: 2.5L 2480cc 151ci L5 (3.25x3.65; 82.5x92.8); Sub-Model: S;
Vehicle Fitment Notes:
Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist
Includes Inner Tie Rods Zero-point calibration is required following installation to ensure proper performance. A scan tool must be used to perform the calibration. with Electronic Power Assist