1988 Volkswagen Jetta Alignment Shim
Navigate our online catalogue to find original replacement Alignment Shims specifically designed to fit a 1988 Volkswagen Jetta.
Alignment Shim
$34.62
Out of Stock
Rear
Condition: New
Required Per Vehicle: 2
Required Per Vehicle: 2
Made in USA
Vehicle Fitment Notes:
M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim Full Contact Dual Angle Shim Up to Plus/Minus 1-1/2 Degree Camber & Plus/Minus 1-1/2 Degree Toe Blue Shim Internal Cut To Fit Tabs Check Caliper To Rotor Clearance After Installation
M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim Full Contact Dual Angle Shim Up to Plus/Minus 1-1/2 Degree Camber & Plus/Minus 1-1/2 Degree Toe Blue Shim Internal Cut To Fit Tabs Check Caliper To Rotor Clearance After Installation
Alignment Shim
$11.55
Call For Availability
Rear
Condition: New
Required Per Vehicle: 2
Required Per Vehicle: 2
Made in USA
Vehicle Fitment Notes:
Plus or Minus 1.5 Degree(s) Camber, Plus or Minus 1.5 Degree(s) Toe Blue Full Contact Dual Angle Shim Allen Head Rear Hub Bolt Set, MS50040 (Pkg 8, M10 x 1.5 x 40mm), must be used with shim. Check for caliper to rotor clearance with disc brakes. Use spacer set MS50042 as necessary to keep caliper centered on rotor.
Plus or Minus 1.5 Degree(s) Camber, Plus or Minus 1.5 Degree(s) Toe Blue Full Contact Dual Angle Shim Allen Head Rear Hub Bolt Set, MS50040 (Pkg 8, M10 x 1.5 x 40mm), must be used with shim. Check for caliper to rotor clearance with disc brakes. Use spacer set MS50042 as necessary to keep caliper centered on rotor.
Alignment Shim
$53.96
Call For Availability
Rear
Condition: New
Required Per Vehicle: 2
Required Per Vehicle: 2
Made in USA
Vehicle Fitment Notes:
Metal Shim Pack: Allows 3/4 degree or 3/16" of alignment change
Metal Shim Pack: Allows 3/4 degree or 3/16" of alignment change