1986 Oldsmobile Firenza Rack and Pinion Assemblies
Save up to 40% on original replacement 1986 Oldsmobile Firenza Rack and Pinion Assemblies. Navigate our online catalogue to find Rack and Pinion Assemblies and other parts designed specifically to fit a 1986 Oldsmobile Firenza.
Rack and Pinion Assembly
$164.48
Out of Stock
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
$164.48
Out of Stock
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
with Soft Ride Suspension ( (FE1) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Soft Ride Suspension ( (FE1) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
$164.48
Out of Stock
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
$164.48
Out of Stock
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
with Soft Ride Suspension ( (FE1) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Soft Ride Suspension ( (FE1) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
with Sport Suspension ( (FE3) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Sport Suspension ( (FE3) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
with Sport Suspension ( (FE3) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Sport Suspension ( (FE3) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Hydraulic Power with Splined Input Shaft For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Hydraulic Power with Splined Input Shaft For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Vehicle Fitment Notes:
with Splined Input Shaft Supplied without Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
with Splined Input Shaft Supplied without Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Flat Sided Input Shaft with Hydraulic Power with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Flat Sided Input Shaft with Hydraulic Power with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
with Soft Ride Suspension ( (FE1) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Soft Ride Suspension ( (FE1) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Flat Sided Input Shaft with Hydraulic Power with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Flat Sided Input Shaft with Hydraulic Power with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
with Soft Ride Suspension ( (FE1) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Soft Ride Suspension ( (FE1) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
with Sport Suspension ( (FE3) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Sport Suspension ( (FE3) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
with Sport Suspension ( (FE3) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Sport Suspension ( (FE3) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Vehicle Fitment Notes:
with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Rack and Pinion Assembly
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Manual Rack & Pinion Steering
Supplied without Inner Tie Rods with Manual Rack & Pinion Steering