2004 Nissan Sentra Engine Control Modules
Save up to 40% on original replacement 2004 Nissan Sentra Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 2004 Nissan Sentra.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
ID #(s) MEC33-304, MEC33-305 A1 Correct VIN and OE Number required when ordering Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
ID #(s) MEC33-304, MEC33-305 A1 Correct VIN and OE Number required when ordering Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
ID #(s) MEC33-304, MEC33-305 A1 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
ID #(s) MEC33-304, MEC33-305 A1 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
ID #(s) MEC33-270, 271, 273, 274 This Unit is Pre-Programmed at the Factory
ID #(s) MEC33-270, 271, 273, 274 This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U902 First Source - Call For Availability Refer to Service Manual - On-Car Programming May Be Required to match Vehicle Specifications and / or Customer Preference Settings for Proper Install
with Original Equipment (OE) # 23710-8U902 First Source - Call For Availability Refer to Service Manual - On-Car Programming May Be Required to match Vehicle Specifications and / or Customer Preference Settings for Proper Install
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
ID #(s) MEC33-294 A1, MEC33-295 A1 Correct VIN and OE Number required when ordering Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
ID #(s) MEC33-294 A1, MEC33-295 A1 Correct VIN and OE Number required when ordering Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
ID #(s) MEC33-294 A1, MEC33-295 A1 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
ID #(s) MEC33-294 A1, MEC33-295 A1 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U781, 23710-8U714 Correct VIN and OE Number required when ordering Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
with Original Equipment (OE) # 23710-8U781, 23710-8U714 Correct VIN and OE Number required when ordering Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U781, 23710-8U714 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
with Original Equipment (OE) # 23710-8U781, 23710-8U714 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
ID #(s) MEC63-340 B1, MEC63-341, MEC63-342 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
ID #(s) MEC63-340 B1, MEC63-341, MEC63-342 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
ID #(s) MEC63-340 B1, MEC63-341, MEC63-342 Correct VIN and OE Number required when ordering Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
ID #(s) MEC63-340 B1, MEC63-341, MEC63-342 Correct VIN and OE Number required when ordering Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U806, 8U807, 8U808, 8U83E First Source - Call For Availability
with Original Equipment (OE) # 23710-8U806, 8U807, 8U808, 8U83E First Source - Call For Availability
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
ID #(s) MEC33-300, 301, 303 Correct VIN and OE Number required when ordering Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
ID #(s) MEC33-300, 301, 303 Correct VIN and OE Number required when ordering Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
ID #(s) MEC33-300, 301, 303 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
ID #(s) MEC33-300, 301, 303 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U716, 8U717, 8U718, 8U784 Correct VIN and OE Number required when ordering Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
with Original Equipment (OE) # 23710-8U716, 8U717, 8U718, 8U784 Correct VIN and OE Number required when ordering Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U716, 8U717, 8U718, 8U784 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
with Original Equipment (OE) # 23710-8U716, 8U717, 8U718, 8U784 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U706 First Source - Call For Availability
with Original Equipment (OE) # 23710-8U706 First Source - Call For Availability
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Engine Base: 1.8L 1769cc L4 (3.15x3.46; 80.0x88.0);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U711 First Source - Call For Availability
with Original Equipment (OE) # 23710-8U711 First Source - Call For Availability
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U740 First Source - Call For Availability
with Original Equipment (OE) # 23710-8U740 First Source - Call For Availability
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U860 First Source - Call For Availability
with Original Equipment (OE) # 23710-8U860 First Source - Call For Availability
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U860 Obsolete First Source - Call For Availability
with Original Equipment (OE) # 23710-8U860 Obsolete First Source - Call For Availability
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U865 First Source - Call For Availability
with Original Equipment (OE) # 23710-8U865 First Source - Call For Availability
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U865 Obsolete First Source - Call For Availability
with Original Equipment (OE) # 23710-8U865 Obsolete First Source - Call For Availability
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U900 First Source - Call For Availability
with Original Equipment (OE) # 23710-8U900 First Source - Call For Availability
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
with Original Equipment (OE) # 23710-8U900 Obsolete First Source - Call For Availability
with Original Equipment (OE) # 23710-8U900 Obsolete First Source - Call For Availability
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
ID #(s) MEC33360, MEC33361, MEC33362 After Installation Anti-Theft Relearn procedure is required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
ID #(s) MEC33360, MEC33361, MEC33362 After Installation Anti-Theft Relearn procedure is required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
ID #(s) MEC33360, MEC33361, MEC33362 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues After Installation Anti-Theft Relearn procedure is required
ID #(s) MEC33360, MEC33361, MEC33362 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues After Installation Anti-Theft Relearn procedure is required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
ID #(s) MEC63-451 A1 Correct VIN and OE Number required when ordering Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
ID #(s) MEC63-451 A1 Correct VIN and OE Number required when ordering Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
ID #(s) MEC63-451 A1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
ID #(s) MEC63-451 A1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering