1997 Jeep Wrangler Drive Shaft
Navigate our online catalogue to find original replacement Drive Shafts specifically designed to fit a 1997 Jeep Wrangler.
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Vehicle Fitment Notes:
with 231 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 231 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Vehicle Fitment Notes:
with 242 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 242 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Vehicle Fitment Notes:
with 38.27 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 38.27 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Vehicle Fitment Notes:
with 38.27 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 38.27 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 231 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 231 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 242 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 242 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 38.27 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 38.27 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 38.27 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 38.27 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 231 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 231 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 242 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 242 Transfer Case with Dana Model 30 Axle with 38.27" (972 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 38.27 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 38.27 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$571.89
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 38.27 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 38.27 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$480.65
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 231 Transfer Case with Dana Model 30 Axle with 39.17" (995 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 231 Transfer Case with Dana Model 30 Axle with 39.17" (995 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$480.65
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 242 Transfer Case with Dana Model 30 Axle with 39.17" (995 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 242 Transfer Case with Dana Model 30 Axle with 39.17" (995 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$480.65
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 39.17 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 39.17 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$480.65
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 39.17 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 39.17 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$551.55
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Sub-Model: Base; Wheel Base: 237.2cm (93.4in.);
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Sub-Model: Base; Wheel Base: 237.2cm (93.4in.);
Vehicle Fitment Notes:
2 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit
2 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit
Drive Shaft
$551.55
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Sub-Model: SE; Wheel Base: 237.2cm (93.4in.);
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Sub-Model: SE; Wheel Base: 237.2cm (93.4in.);
Vehicle Fitment Notes:
2 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit
2 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit
Drive Shaft
$551.55
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Sub-Model: Sahara; Wheel Base: 237.2cm (93.4in.);
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Sub-Model: Sahara; Wheel Base: 237.2cm (93.4in.);
Vehicle Fitment Notes:
2 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit
2 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit
Drive Shaft
$551.55
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Sub-Model: Sport; Wheel Base: 237.2cm (93.4in.);
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Sub-Model: Sport; Wheel Base: 237.2cm (93.4in.);
Vehicle Fitment Notes:
2 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit
2 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit
Drive Shaft
$444.98
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Wheel Base: 237.2cm (93.4in.);
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Wheel Base: 237.2cm (93.4in.);
Vehicle Fitment Notes:
w/Sales Code DRK (Dana 44 Axle (226 mm Ring Gear))
w/Sales Code DRK (Dana 44 Axle (226 mm Ring Gear))
Drive Shaft
$392.96
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Vehicle Fitment Notes:
Spicer 35 Axle
Spicer 35 Axle
Drive Shaft
$392.96
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
Spicer 35 Axle
Spicer 35 Axle
Drive Shaft
$993.78
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
Spicer 44 Axle
Spicer 44 Axle
Drive Shaft
$532.49
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
w/Sales Code DRJ (Dana M35/194 mm Rear Axle)
w/Sales Code DRJ (Dana M35/194 mm Rear Axle)
Drive Shaft
$796.25
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
TJ Series
TJ Series
Drive Shaft
$656.10
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Vehicle Fitment Notes:
TJ Series
TJ Series
Drive Shaft
$656.10
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
TJ Series
TJ Series
Drive Shaft Assembly
$546.35
In Stock
Ships: Today, Sep. 30th
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Drive Shaft Assembly
$546.35
In Stock
Ships: Today, Sep. 30th
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Shaft Assembly
$546.35
In Stock
Ships: Today, Sep. 30th
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
With 4 Speed
With 4 Speed
Drive Shaft Assembly
$500.34
In Stock
Ships: Today, Sep. 30th
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Sub-Model: SE;
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Sub-Model: SE;
Drive Shaft Assembly
$500.34
In Stock
Ships: Today, Sep. 30th
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Sub-Model: Sahara;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Sub-Model: Sahara;
Drive Shaft Assembly
$500.34
In Stock
Ships: Today, Sep. 30th
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Sub-Model: Sport;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Sub-Model: Sport;
Drive Shaft Assembly
$518.47
In Stock
Ships: Today, Sep. 30th
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Pick-Up: Ready in 2-3 Hours (Order before 3:30 PM)
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
With 39 1/2" Prop Shaft
With 39 1/2" Prop Shaft
Drive Shaft Assembly
$470.42
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Vehicle Fitment Notes:
Spicer 35 Axle - Rear Driveshaft - End-to-end measurement 510mm - 20in
Spicer 35 Axle - Rear Driveshaft - End-to-end measurement 510mm - 20in
Drive Shaft Assembly
$470.42
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
Spicer 35 Axle - Rear Driveshaft - End-to-end measurement 510mm - 20in
Spicer 35 Axle - Rear Driveshaft - End-to-end measurement 510mm - 20in
Drive Shaft Assembly
$522.68
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
Spicer 35 Rear Axle - Rear Driveshaft - End-to-end measurement 470mm - 18 1/2in
Spicer 35 Rear Axle - Rear Driveshaft - End-to-end measurement 470mm - 18 1/2in
Drive Shaft Assembly
$470.42
Out of Stock
Rear
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
Spicer 44 Axle - Rear Driveshaft - End-to-end measurement 440mm - 17 1/3in
Spicer 44 Axle - Rear Driveshaft - End-to-end measurement 440mm - 17 1/3in
Drive Shaft Assembly
$836.29
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 1,000mm ± 10mm - 39 3/8in ± 3/5in
Front Driveshaft - End-to-end measurement 1,000mm ± 10mm - 39 3/8in ± 3/5in
Drive Shaft Assembly
$836.29
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 1,000mm ± 10mm - 39 3/8in ± 3/5in
Front Driveshaft - End-to-end measurement 1,000mm ± 10mm - 39 3/8in ± 3/5in
Drive Shaft Assembly
$597.34
Out of Stock
Front
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 1,038mm ± 25mm - 40 6/7in ± 1in
Front Driveshaft - End-to-end measurement 1,038mm ± 25mm - 40 6/7in ± 1in