1994 Jeep Grand Cherokee Drive Shaft
Navigate our online catalogue to find original replacement Drive Shafts specifically designed to fit a 1994 Jeep Grand Cherokee.
Drive Shaft
$543.00 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic;
Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 32.40 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 32.40 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$543.00 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic;
Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 32.40" (823 mm) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 32.40" (823 mm) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
Drive Shaft
$743.63 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 30.71 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30.71 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Drive Shaft
$743.63 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 30.71 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30.71 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Drive Shaft
$743.63 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 30.71 (in) Long Driveshaft with 249 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30.71 (in) Long Driveshaft with 249 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Drive Shaft
$743.63 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 30.71" (780 mm) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30.71" (780 mm) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Drive Shaft
$743.63 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 30.71" (780 mm) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30.71" (780 mm) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Drive Shaft
$743.63 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 30.71" (780 mm) Long Driveshaft with 249 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30.71" (780 mm) Long Driveshaft with 249 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Drive Shaft
$426.47 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 27.99 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 27.99 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Drive Shaft
$426.47 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 27.99" (711 mm) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 27.99" (711 mm) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
Drive Shaft
$597.40 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic; Transmission Code: 44RE;
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic; Transmission Code: 44RE;
Vehicle Fitment Notes:
CV Joint At Front Yoke
CV Joint At Front Yoke
Drive Shaft
$802.94 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Shaft
$570.84 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Shaft
$570.84 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: RWD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: RWD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Shaft
$629.52 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Mfr Body Code: ZJ;
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Mfr Body Code: ZJ;
Drive Shaft
$629.52 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: RWD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Mfr Body Code: ZJ;
Drive Type: RWD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Mfr Body Code: ZJ;
Drive Shaft
$543.13 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Shaft
$606.77 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
U-Joint at Front Yoke
U-Joint at Front Yoke
Drive Shaft
$726.43 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Code: 42RE; Transmission Speeds: 4;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Code: 42RE; Transmission Speeds: 4;
Vehicle Fitment Notes:
w/Constant Velocity Joint
w/Constant Velocity Joint
Drive Shaft
$578.03 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic; Transmission Code: 46RH; Transmission Speeds: 4;
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic; Transmission Code: 46RH; Transmission Speeds: 4;
Vehicle Fitment Notes:
w/Constant Velocity Joint
w/Constant Velocity Joint
Drive Shaft
$1,008.21 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Code: 42RE;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Code: 42RE;
Vehicle Fitment Notes:
Double U-joint at Transfer Case Sales Code DHP (Select-Trac Full Time 4WD) U-Joint at Front Differential
Double U-joint at Transfer Case Sales Code DHP (Select-Trac Full Time 4WD) U-Joint at Front Differential
Drive Shaft
$560.91 CAD
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Drive Type: RWD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Code: 42RE;
Drive Type: RWD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Code: 42RE;
Drive Shaft Assembly
$482.60 CAD
In Stock
Condition: New
Ships: Monday Nov. 17th
Pick-Up: Ready in 2-4 Hours (Order before 10:30 AM)
Pick-Up: Ready in 2-4 Hours (Order before 10:30 AM)
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Shaft Assembly
$447.84 CAD
In Stock
Condition: New
Ships: Monday Nov. 17th
Pick-Up: Ready in 2-4 Hours (Order before 10:30 AM)
Pick-Up: Ready in 2-4 Hours (Order before 10:30 AM)
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
With 231 Transfer Case
With 231 Transfer Case
Drive Shaft Assembly
$597.34 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Code: 44RE;
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Code: 44RE;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 759mm ± 10mm - 29 7/8in ± 3/5in
Front Driveshaft - End-to-end measurement 759mm ± 10mm - 29 7/8in ± 3/5in
Drive Shaft Assembly
$597.34 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Code: 42RE;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Code: 42RE;
Vehicle Fitment Notes:
With Constant Velocity Joint - Front Driveshaft - End-to-end measurement 816mm ± 5mm - 32 1/8in ± 1/5in
With Constant Velocity Joint - Front Driveshaft - End-to-end measurement 816mm ± 5mm - 32 1/8in ± 1/5in
Drive Shaft Assembly
$597.34 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Code: 46RH;
Drive Type: 4WD; Engine Base: 5.2L 5211cc 318ci V8 (3.91x3.31; 99.3x84.1); Transmission Code: 46RH;
Vehicle Fitment Notes:
With Constant Velocity Joint - Front Driveshaft - End-to-end measurement 873mm ± 5mm - 34 3/8in ± 1/5in
With Constant Velocity Joint - Front Driveshaft - End-to-end measurement 873mm ± 5mm - 34 3/8in ± 1/5in
Drive Shaft Assembly
$597.34 CAD
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Vehicle fitment:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Code: 42RE;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Code: 42RE;
Vehicle Fitment Notes:
With Sales Code DHP (Select Trac Full Time 4WD) - U-Joint at Front DifferentialL and Double U-Joint at Transfer Case - Front Driveshaft - End-to-end measurement 776mm ± 10mm - 30 5/9in ± 3/5in
With Sales Code DHP (Select Trac Full Time 4WD) - U-Joint at Front DifferentialL and Double U-Joint at Transfer Case - Front Driveshaft - End-to-end measurement 776mm ± 10mm - 30 5/9in ± 3/5in