1995 Ford Windstar Engine Control Modules
Save up to 40% on original replacement 1995 Ford Windstar Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 1995 Ford Windstar.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
ID #(s) ML1-311 This Unit is Pre-Programmed at the Factory with Calibration # 5-56K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) ML1-311 This Unit is Pre-Programmed at the Factory with Calibration # 5-56K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 5-56K ID #(s) ML1-311 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-56K ID #(s) ML1-311 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
ID #(s) ML1-311 This Unit is Pre-Programmed at the Factory with Calibration # 5-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) ML1-311 This Unit is Pre-Programmed at the Factory with Calibration # 5-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 5-56P ID #(s) ML1-311 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-56P ID #(s) ML1-311 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
ID #(s) ML1-211 This Unit is Pre-Programmed at the Factory with Calibration # 5-56K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) ML1-211 This Unit is Pre-Programmed at the Factory with Calibration # 5-56K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 5-56K ID #(s) ML1-211 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-56K ID #(s) ML1-211 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 4-62S-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 4-62S-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 4-62S-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 4-62S-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 4-62J-R00, 4-62J-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 4-62J-R00, 4-62J-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 4-62J-R00, 4-62J-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 4-62J-R00, 4-62J-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 4-62J-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 4-62J-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 4-62J-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 4-62J-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
ID #(s) ML1-211 This Unit is Pre-Programmed at the Factory with Calibration # 5-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) ML1-211 This Unit is Pre-Programmed at the Factory with Calibration # 5-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 5-56P ID #(s) ML1-211 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-56P ID #(s) ML1-211 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 4-62S-R00, 4-62S-R05, 4-62S-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 4-62S-R00, 4-62S-R05, 4-62S-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 4-62S-R00, 4-62S-R05, 4-62S-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 4-62S-R00, 4-62S-R05, 4-62S-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-113 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-113 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-113 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-113 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-311 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-311 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-311 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-311 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required