2001 Ford Ranger Engine Control Modules
Save up to 40% on original replacement 2001 Ford Ranger Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 2001 Ford Ranger.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
All Calibrations with Module ID MP2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MP2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MP2-154 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MP2-154 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-154 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-154 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MP2-155 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MP2-155 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-155 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-155 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MP2-1A1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MP2-1A1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-1A1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-1A1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MP2-1A2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MP2-1A2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-1A2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-1A2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9B1A-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9B1A-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
with Calibration # 9B1A-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9B1A-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9B1A-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9B1A-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
with Calibration # 9B1A-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9B1A-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9B1M-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9B1M-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
with Calibration # 9B1M-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9B1M-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9B1M-AC Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9B1M-AC Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
with Calibration # 9B1M-AC Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9B1M-AC Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9B1M-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9B1M-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
with Calibration # 9B1M-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9B1M-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
All Calibrations with Module ID MP2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MP2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MP2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-711 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-711 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-711 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-711 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-712 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-712 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Engine Base: 2.5L 153ci L4 (3.78x3.40; 96.0x86.4);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-712 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-712 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required