2009 Ford Mustang Engine Control Modules
Save up to 40% on original replacement 2009 Ford Mustang Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 2009 Ford Mustang.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Vehicle Fitment Notes:
All Calibrations with Module ID VK2-R3802 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID VK2-R3802 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-R3802 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-R3802 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
All Calibrations with Module ID VK2-R3801 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID VK2-R3801 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-R3801 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-R3801 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0); Transmission Control Type: Automatic;
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
All Calibrations with Module ID VK2-R3803 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID VK2-R3803 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0); Transmission Control Type: Automatic;
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-R3803 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-R3803 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0); Transmission Control Type: Manual;
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
All Calibrations with Module ID VK2-R3804 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID VK2-R3804 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0); Transmission Control Type: Manual;
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-R3804 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-R3804 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID VK2-R3805 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle
All Calibrations with Module ID VK2-R3805 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
Important: Vehicle Specific Flash Programming Required ON the Vehicle All Calibrations with Module ID VK2-R3805 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Important: Vehicle Specific Flash Programming Required ON the Vehicle All Calibrations with Module ID VK2-R3805 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues