2011 Ford Fusion Engine Control Modules
Save up to 40% on original replacement 2011 Ford Fusion Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 2011 Ford Fusion.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.5L 3496cc 213ci V6 (3.64x3.41; 92.5x86.7);
Engine Base: 3.5L 3496cc 213ci V6 (3.64x3.41; 92.5x86.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5817 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5817 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.5L 3496cc 213ci V6 (3.64x3.41; 92.5x86.7);
Engine Base: 3.5L 3496cc 213ci V6 (3.64x3.41; 92.5x86.7);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5817 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5817 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.5L 3496cc 213ci V6 (3.64x3.41; 92.5x86.7);
Engine Base: 3.5L 3496cc 213ci V6 (3.64x3.41; 92.5x86.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5818 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5818 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.5L 3496cc 213ci V6 (3.64x3.41; 92.5x86.7);
Engine Base: 3.5L 3496cc 213ci V6 (3.64x3.41; 92.5x86.7);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5818 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5818 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1); Fuel Type: GAS;
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1); Fuel Type: GAS;
Vehicle Fitment Notes:
All Calibrations with Module ID 9L8A-12B684-AB,NA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID 9L8A-12B684-AB,NA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1); Fuel Type: GAS;
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1); Fuel Type: GAS;
Vehicle Fitment Notes:
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID 9L8A-12B684-AB,NA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID 9L8A-12B684-AB,NA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: FLEX;
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: FLEX;
Vehicle Fitment Notes:
All Calibrations with Module ID 9L8A-12B684-AB,NA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID 9L8A-12B684-AB,NA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: FLEX;
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: FLEX;
Vehicle Fitment Notes:
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID 9L8A-12B684-AB,NA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID 9L8A-12B684-AB,NA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1); Fuel Type: GAS;
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1); Fuel Type: GAS;
Vehicle Fitment Notes:
All Calibrations with Module ID 9L8A 12B684-KA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID 9L8A 12B684-KA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1); Fuel Type: GAS;
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1); Fuel Type: GAS;
Vehicle Fitment Notes:
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID 9L8A 12B684-KA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID 9L8A 12B684-KA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
All Calibrations with Module ID BL8A-12B684-AB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID BL8A-12B684-AB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-AB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-AB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
All Calibrations with Module ID 9L8A-12B684-DB,LA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID 9L8A-12B684-DB,LA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID 9L8A-12B684-DB,LA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID 9L8A-12B684-DB,LA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
All Calibrations with Module ID BL8A-12B684-CB Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID BL8A-12B684-CB Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-CB Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-CB Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
All Calibrations with Module ID BL8A-12B684-BA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID BL8A-12B684-BA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-BA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-BA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID BL8A-12B684-BA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID BL8A-12B684-BA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Vehicle Fitment Notes:
First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-BA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-BA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
All Calibrations with Module ID BL8A-12B684-AA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID BL8A-12B684-AA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-AA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-AA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
All Calibrations with Module ID BL8A-12B684-CA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID BL8A-12B684-CA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-CA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
First Source - Call For Availability Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID BL8A-12B684-CA Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
All Calibrations with Module ID AM6A-12B684-DB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. First Source - Call For Availability Correct VIN and OE Number required when ordering
All Calibrations with Module ID AM6A-12B684-DB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. First Source - Call For Availability Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Engine Base: 2.5L 2488cc 152ci L4 (3.50x3.94; 88.9x100.1);
Vehicle Fitment Notes:
Obsolete First Source - Call For Availability PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID AM6A-12B684-DB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Obsolete First Source - Call For Availability PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID AM6A-12B684-DB Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues