2004 Ford Explorer Engine Control Modules
Save up to 40% on original replacement 2004 Ford Explorer Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 2004 Ford Explorer.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
All Calibrations with Module ID LBO-524/525 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID LBO-524/525 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID LBO-524/525 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID LBO-524/525 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
All Calibrations with Module ID HSO-230,232 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID HSO-230,232 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID HSO-230,232 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID HSO-230,232 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
All Calibrations with Module ID HSO-231,233 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID HSO-231,233 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID HSO-231,233 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID HSO-231,233 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
All Calibrations with Module ID LBO-526/527 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID LBO-526/527 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID LBO-526/527 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID LBO-526/527 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
All Calibrations with Module ID NCD-250 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID NCD-250 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID NCD-250 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID NCD-250 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
All Calibrations with Module ID LBO-520 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required PATS Module Requires Programming after ECM Install. First Source - Call For Availability Correct VIN and OE Number required when ordering
All Calibrations with Module ID LBO-520 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required PATS Module Requires Programming after ECM Install. First Source - Call For Availability Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
First Source - Call For Availability PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID LBO-520 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
First Source - Call For Availability PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID LBO-520 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
All Calibrations with Module ID LBO-522 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required PATS Module Requires Programming after ECM Install. First Source - Call For Availability Correct VIN and OE Number required when ordering
All Calibrations with Module ID LBO-522 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required PATS Module Requires Programming after ECM Install. First Source - Call For Availability Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
First Source - Call For Availability PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID LBO-522 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
First Source - Call For Availability PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID LBO-522 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required