1998 Ford Econoline Super Duty Engine Control Modules
Save up to 40% on original replacement 1998 Ford Econoline Super Duty Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 1998 Ford Econoline Super Duty.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-AAA,AAB,AAC,AAD This Unit is Pre-Programmed at the Factory with Calibration # 8-96E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-AAA,AAB,AAC,AAD This Unit is Pre-Programmed at the Factory with Calibration # 8-96E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96E ID #(s) F8UF-AAA,AAB,AAC,AAD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96E ID #(s) F8UF-AAA,AAB,AAC,AAD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-ABA,ABB This Unit is Pre-Programmed at the Factory with Calibration # 8-96J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-ABA,ABB This Unit is Pre-Programmed at the Factory with Calibration # 8-96J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96J ID #(s) F8UF-ABA,ABB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96J ID #(s) F8UF-ABA,ABB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-ACA,ACB,ACC,ACD,ACE This Unit is Pre-Programmed at the Factory with Calibration # 8-96T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-ACA,ACB,ACC,ACD,ACE This Unit is Pre-Programmed at the Factory with Calibration # 8-96T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96T ID #(s) F8UF-ACA,ACB,ACC,ACD,ACE Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96T ID #(s) F8UF-ACA,ACB,ACC,ACD,ACE Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-ADA,ADB,ADC,ADD This Unit is Pre-Programmed at the Factory with Calibration # 8-96W Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-ADA,ADB,ADC,ADD This Unit is Pre-Programmed at the Factory with Calibration # 8-96W Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96W ID #(s) F8UF-ADA,ADB,ADC,ADD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96W ID #(s) F8UF-ADA,ADB,ADC,ADD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-AEA,AEB,AEC,AED This Unit is Pre-Programmed at the Factory with Calibration # 8-96X Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-AEA,AEB,AEC,AED This Unit is Pre-Programmed at the Factory with Calibration # 8-96X Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96X ID #(s) F8UF-AEA,AEB,AEC,AED Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96X ID #(s) F8UF-AEA,AEB,AEC,AED Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-AHA This Unit is Pre-Programmed at the Factory with Calibration # 8-96Y Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-AHA This Unit is Pre-Programmed at the Factory with Calibration # 8-96Y Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96Y ID #(s) F8UF-AHA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96Y ID #(s) F8UF-AHA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MTC-101 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID MTC-101 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID MTC-101 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID MTC-101 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
All Calibrations with Module ID DPC-405 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID DPC-405 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-405 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-405 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
All Calibrations with Module ID DPC-315 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID DPC-315 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-315 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-315 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
All Calibrations with Module ID DPC-415 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID DPC-415 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-415 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-415 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required