2008 Ford E-250 Engine Control Modules
Save up to 40% on original replacement 2008 Ford E-250 Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 2008 Ford E-250.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID VK2-C2808 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID VK2-C2808 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-C2808 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-C2808 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
All Calibrations with Module ID VK2-C2809 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID VK2-C2809 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Engine Base: 4.6L 281ci V8 (3.55x3.54; 90.2x90.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-C2809 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-C2809 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID VK2-C2809 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID VK2-C2809 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-C2809 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-C2809 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID VK2-C2810 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID VK2-C2810 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-C2810 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID VK2-C2810 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID VK2-C2811 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
All Calibrations with Module ID VK2-C2811 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues