1997 Ford E-250 Econoline Engine Control Modules
Save up to 40% on original replacement 1997 Ford E-250 Econoline Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 1997 Ford E-250 Econoline.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-44J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-44J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
with Calibration # 7-44J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-44J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-44K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-44K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
with Calibration # 7-44K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-44K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-44L Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-44L Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
with Calibration # 7-44L Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-44L Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-44M Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-44M Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
with Calibration # 7-44M Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-44M Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-44T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-44T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
with Calibration # 7-44T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-44T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 7-44U Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 7-44U Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
with Calibration # 7-44U Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 7-44U Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-451 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-451 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Engine Base: 4.2L 256ci V6 (3.81x3.74; 96.8x95.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-451 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-451 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MLC-251 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLC-251 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLC-251 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLC-251 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F7UF-ALB with Calibration # 7-46K Obsolete First Source - Call For Availability Correct VIN and OE Number required when ordering
ID #(s) F7UF-ALB with Calibration # 7-46K Obsolete First Source - Call For Availability Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Made in USA
Vehicle fitment:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 7-46K ID #(s) F7UF-ALB First Source - Call For Availability Correct VIN and OE Number required when ordering
with Calibration # 7-46K ID #(s) F7UF-ALB First Source - Call For Availability Correct VIN and OE Number required when ordering