1999 Ford Contour Engine Control Modules
Save up to 40% on original replacement 1999 Ford Contour Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 1999 Ford Contour.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AS with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AS with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 9EQA-AS with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9EQA-AS with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
ID #(s) 98BB-BXA This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AA with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 98BB-BXA This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-AA with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 9EQA-AA with Federal Emissions System ID #(s) 98BB-BXA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9EQA-AA with Federal Emissions System ID #(s) 98BB-BXA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
ID #(s) 98BB-BYA,BYB This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) 98BB-BYA,BYB This Unit is Pre-Programmed at the Factory with Calibration # 9EQA-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 9EQA-BA with California Emissions System ID #(s) 98BB-BYA,BYB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9EQA-BA with California Emissions System ID #(s) 98BB-BYA,BYB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9EQM-AA with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9EQM-AA with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 9EQM-AA with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9EQM-AA with Federal Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9EQM-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9EQM-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
with Calibration # 9EQM-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9EQM-BA with California Emissions System Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-413 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-413 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-413 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-413 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-416 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-416 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-416 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-416 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID LP2-352 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
All Calibrations with Module ID LP2-352 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID LP2-352 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Correct VIN and OE Number required when ordering All Calibrations with Module ID LP2-352 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
All Calibrations with Module ID LP2-356 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID LP2-356 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Engine Base: 2.0L 1989cc 121ci L4 (3.34x3.46; 84.8x88.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID LP2-356 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID LP2-356 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MLF-4G1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLF-4G1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-4G1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-4G1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MLF-4G2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLF-4G2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-4G2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-4G2 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MLF-520 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLF-520 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-520 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-520 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MLF-521 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLF-521 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Engine Base: 2.5L 2450cc 155ci V6 (3.24x3.13; 82.3x79.5);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-521 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLF-521 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues