1988 Chevrolet Cavalier Rack and Pinion Assembly
Navigate our online catalogue to find original replacement Rack and Pinion Assemblies specifically designed to fit a 1988 Chevrolet Cavalier.
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: Base;
Sub-Model: Base;
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: Base;
Sub-Model: Base;
Vehicle Fitment Notes:
without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: RS;
Sub-Model: RS;
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: RS;
Sub-Model: RS;
Vehicle Fitment Notes:
without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: VL;
Sub-Model: VL;
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: VL;
Sub-Model: VL;
Vehicle Fitment Notes:
without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
without Touring Suspension ( (FE2) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: Base;
Sub-Model: Base;
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Touring Suspension ( (FE2) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Touring Suspension ( (FE2) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: Base;
Sub-Model: Base;
Vehicle Fitment Notes:
with Touring Suspension ( (FE2) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Touring Suspension ( (FE2) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: RS;
Sub-Model: RS;
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Touring Suspension ( (FE2) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Touring Suspension ( (FE2) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: RS;
Sub-Model: RS;
Vehicle Fitment Notes:
with Touring Suspension ( (FE2) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Touring Suspension ( (FE2) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: VL;
Sub-Model: VL;
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Touring Suspension ( (FE2) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Touring Suspension ( (FE2) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: VL;
Sub-Model: VL;
Vehicle Fitment Notes:
with Touring Suspension ( (FE2) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Touring Suspension ( (FE2) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: Z24;
Sub-Model: Z24;
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle fitment:
Sub-Model: Z24;
Sub-Model: Z24;
Vehicle Fitment Notes:
with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
Rack and Pinion Assembly
Required Per Vehicle: 1
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Manual Rack & Pinion Steering
Supplied without Inner Tie Rods with Manual Rack & Pinion Steering