1971 Audi 100 Series Alignment Shim
Navigate our online catalogue to find original replacement Alignment Shims specifically designed to fit a 1971 Audi 100 Series.
Alignment Shim
$43.79
Out of Stock
Rear
Condition: New
Required Per Vehicle: 2
Required Per Vehicle: 2
Made in USA
Vehicle Fitment Notes:
Full Contact Dual Angle Shim Gray Shim Up to Plus/Minus 1-1/2 Degree Camber & Plus/Minus 1-1/2 Degree Toe Internal Cut To Fit Tabs Check Caliper To Rotor Clearance After Installation
Full Contact Dual Angle Shim Gray Shim Up to Plus/Minus 1-1/2 Degree Camber & Plus/Minus 1-1/2 Degree Toe Internal Cut To Fit Tabs Check Caliper To Rotor Clearance After Installation
Alignment Shim
$13.51
Call For Availability
Rear
Condition: New
Required Per Vehicle: 2
Required Per Vehicle: 2
Made in USA
Vehicle Fitment Notes:
Grey Full Contact Dual Angle Shim; Adjustment Range: Camber +/-1.50 degree Toe +/-1.50 degree Check for caliper to rotor clearance with disc brakes. Use spacer set MS50042 as necessary to keep caliper centered on rotor.
Grey Full Contact Dual Angle Shim; Adjustment Range: Camber +/-1.50 degree Toe +/-1.50 degree Check for caliper to rotor clearance with disc brakes. Use spacer set MS50042 as necessary to keep caliper centered on rotor.
Alignment Shim
$53.96
Call For Availability
Rear
Condition: New
Required Per Vehicle: 2
Required Per Vehicle: 2
Made in USA
Vehicle fitment:
Sub-Model: LS;
Sub-Model: LS;
Vehicle Fitment Notes:
Metal Shim Pack: Allows 3/4 degree or 3/16" of alignment change
Metal Shim Pack: Allows 3/4 degree or 3/16" of alignment change