1986 Oldsmobile Firenza Rack and Pinion Assembly
Browse our online catalogue to find original replacement Rack and Pinion Assemblies specifically designed to fit a 1986 Oldsmobile Firenza.
1986 Oldsmobile Firenza Rack and Pinion Assembly
$164.48
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
1986 Oldsmobile Firenza Rack and Pinion Assembly
$164.48
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
with Soft Ride Suspension ( (FE1) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Soft Ride Suspension ( (FE1) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
1986 Oldsmobile Firenza Rack and Pinion Assembly
$164.48
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
1986 Oldsmobile Firenza Rack and Pinion Assembly
$164.48
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
with Soft Ride Suspension ( (FE1) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Soft Ride Suspension ( (FE1) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
with Sport Suspension ( (FE3) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Sport Suspension ( (FE3) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Hydraulic Power with Splined Input Shaft Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
with Sport Suspension ( (FE3) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Sport Suspension ( (FE3) ) with Splined Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Hydraulic Power with Splined Input Shaft For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Hydraulic Power with Splined Input Shaft For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Vehicle Fitment Notes:
with Splined Input Shaft Supplied without Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
with Splined Input Shaft Supplied without Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Flat Sided Input Shaft with Hydraulic Power with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Flat Sided Input Shaft with Hydraulic Power with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
with Soft Ride Suspension ( (FE1) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Soft Ride Suspension ( (FE1) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Flat Sided Input Shaft with Hydraulic Power with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Soft Ride Suspension ( (FE1) ) with Flat Sided Input Shaft with Hydraulic Power with 2-3/4 to 3 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
with Soft Ride Suspension ( (FE1) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Soft Ride Suspension ( (FE1) ) with 2-3/4 to 3 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Engine Base: 1.8L 112ci L4 (3.34x3.13; 84.8x79.5);
Vehicle Fitment Notes:
with Sport Suspension ( (FE3) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Sport Suspension ( (FE3) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Sport Suspension ( (FE3) ) with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock Option Codes are on the Service Parts Identification Sticker For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Engine Base: 2.0L 122ci L4 (3.39x3.39; 86.0x86.0);
Vehicle Fitment Notes:
with Sport Suspension ( (FE3) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
with Sport Suspension ( (FE3) ) with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification sticker with Hydraulic Power
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
Supplied without Inner Tie Rods with Flat Sided Input Shaft with Hydraulic Power with 2-1/2 to 2-3/4 Turns Lock to Lock For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system In-Line Filter available
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Equipped With:
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Engine Base: 2.8L 173ci V6 (3.50x2.99; 89.0x76.0);
Vehicle Fitment Notes:
with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
with 2-1/2 to 2-3/4 Turns Lock to Lock with Flat Sided Input Shaft Supplied without Inner Tie Rods In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
1986 Oldsmobile Firenza Rack and Pinion Assembly
Required Per Vehicle: 1
Fits: 1986 Oldsmobile Firenza
Vehicle Fitment Notes:
Supplied without Inner Tie Rods with Manual Rack & Pinion Steering
Supplied without Inner Tie Rods with Manual Rack & Pinion Steering