1988 Jeep Comanche Drive Shaft Assembly
Browse our online catalogue to find original replacement Drive Shaft Assemblies specifically designed to fit a 1988 Jeep Comanche.
1988 Jeep Comanche Drive Shaft Assembly
$482.60
Limited Stock
Condition: New
Ships: Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Front
Required Per Vehicle: 1
Fits: 1988 Jeep Comanche
Equipped With:
Transmission Control Type: Automatic;
Transmission Control Type: Automatic;
1988 Jeep Comanche Drive Shaft Assembly
$482.60
Limited Stock
Condition: New
Ships: Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
30 11/16 In. Length (Center of Joint to Center of Joint)
30 11/16 In. Length (Center of Joint to Center of Joint)
1988 Jeep Comanche Drive Shaft Assembly
$563.85
Limited Stock
Condition: New
Ships: Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Front
Required Per Vehicle: 1
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
1988 Jeep Comanche Drive Shaft Assembly
$551.77
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 805mm ± 35mm - 31 2/3in ± 1 3/8in
Front Driveshaft - End-to-end measurement 805mm ± 35mm - 31 2/3in ± 1 3/8in
1988 Jeep Comanche Drive Shaft Assembly
$551.77
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 710mm ± 30mm - 28in ± 1 1/5in
Front Driveshaft - End-to-end measurement 710mm ± 30mm - 28in ± 1 1/5in
1988 Jeep Comanche Drive Shaft Assembly
$551.77
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 845mm ± 30mm - 33 1/4in ± 1 1/5in
Front Driveshaft - End-to-end measurement 845mm ± 30mm - 33 1/4in ± 1 1/5in
1988 Jeep Comanche Drive Shaft
$852.34
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 4;
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 231 Transfer Case with 3.55 Axle Ratio with 25.75" (654 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 231 Transfer Case with 3.55 Axle Ratio with 25.75" (654 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$852.34
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 4;
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 231 Transfer Case with 4.11 Axle Ratio with 25.75" (654 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 231 Transfer Case with 4.11 Axle Ratio with 25.75" (654 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$852.34
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 4;
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 3.55 Axle Ratio with 25.75 (in) Long Driveshaft with 231 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.55 Axle Ratio with 25.75 (in) Long Driveshaft with 231 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$852.34
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 4;
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 4.11 Axle Ratio with 25.75 (in) Long Driveshaft with 231 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 4.11 Axle Ratio with 25.75 (in) Long Driveshaft with 231 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$852.34
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 231 Transfer Case with 3.55 Axle Ratio with 25.75" (654 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 231 Transfer Case with 3.55 Axle Ratio with 25.75" (654 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$852.34
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 231 Transfer Case with 4.11 Axle Ratio with 25.75" (654 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 231 Transfer Case with 4.11 Axle Ratio with 25.75" (654 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$852.34
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 3.55 Axle Ratio with 25.75 (in) Long Driveshaft with 231 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.55 Axle Ratio with 25.75 (in) Long Driveshaft with 231 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$852.34
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 4.11 Axle Ratio with 25.75 (in) Long Driveshaft with 231 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 4.11 Axle Ratio with 25.75 (in) Long Driveshaft with 231 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$426.47
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 231 Transfer Case with 3.08 Axle Ratio with 29.25" (743 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 231 Transfer Case with 3.08 Axle Ratio with 29.25" (743 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1988 Jeep Comanche Drive Shaft
$426.47
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 242 Transfer Case with 3.08 Axle Ratio with 29.25" (743 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 242 Transfer Case with 3.08 Axle Ratio with 29.25" (743 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1988 Jeep Comanche Drive Shaft
$426.47
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 3.08 Axle Ratio with 29.25 (in) Long Driveshaft with 231 Transfer Case Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.08 Axle Ratio with 29.25 (in) Long Driveshaft with 231 Transfer Case Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$426.47
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 3.08 Axle Ratio with 29.25 (in) Long Driveshaft with 242 Transfer Case Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.08 Axle Ratio with 29.25 (in) Long Driveshaft with 242 Transfer Case Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$495.97
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 4.11 Axle Ratio with 27.99 (in) Long Driveshaft with Kanda Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 4.11 Axle Ratio with 27.99 (in) Long Driveshaft with Kanda Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$495.97
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with Kanda Transfer Case with 4.11 Axle Ratio with 27.99" (711 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with Kanda Transfer Case with 4.11 Axle Ratio with 27.99" (711 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$495.54
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 231 Transfer Case with 3.55 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 231 Transfer Case with 3.55 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$495.54
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 242 Transfer Case with 3.55 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 242 Transfer Case with 3.55 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$495.54
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 3.55 Axle Ratio with 30.67 (in) Long Driveshaft with 231 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.55 Axle Ratio with 30.67 (in) Long Driveshaft with 231 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$495.54
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 3.55 Axle Ratio with 30.67 (in) Long Driveshaft with 242 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.55 Axle Ratio with 30.67 (in) Long Driveshaft with 242 Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Jeep Comanche Drive Shaft
$1,051.22
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Automatic;
1988 Jeep Comanche Drive Shaft
$495.50
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
1988 Jeep Comanche Drive Shaft
$420.43
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
1988 Jeep Comanche Drive Shaft
$606.77
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Jeep Comanche
Equipped With:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual;