1999 Jeep Cherokee Drive Shaft
Browse our online catalogue to find original replacement Drive Shafts specifically designed to fit a 1999 Jeep Cherokee.
1999 Jeep Cherokee Drive Shaft
$456.14
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Manufacturer: Aisin Warner; Transmission Speeds: 4;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Manufacturer: Aisin Warner; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 231 Transfer Case with Dana Model 30 Axle with 30.63" (778 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 231 Transfer Case with Dana Model 30 Axle with 30.63" (778 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1999 Jeep Cherokee Drive Shaft
$456.14
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Manufacturer: Aisin Warner; Transmission Speeds: 4;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Manufacturer: Aisin Warner; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 242 Transfer Case with Dana Model 30 Axle with 30.63" (778 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 242 Transfer Case with Dana Model 30 Axle with 30.63" (778 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1999 Jeep Cherokee Drive Shaft
$456.14
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Manufacturer: Aisin Warner; Transmission Speeds: 4;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Manufacturer: Aisin Warner; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 30.63 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30.63 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1999 Jeep Cherokee Drive Shaft
$456.14
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Manufacturer: Aisin Warner; Transmission Speeds: 4;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic; Transmission Manufacturer: Aisin Warner; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 30.63 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30.63 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1999 Jeep Cherokee Drive Shaft
$520.13
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 231 Transfer Case with Dana Model 30 Axle with 29.25" (743 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 231 Transfer Case with Dana Model 30 Axle with 29.25" (743 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1999 Jeep Cherokee Drive Shaft
$520.13
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 29.25 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 29.25 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1999 Jeep Cherokee Drive Shaft
$520.13
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 29.25 (in) Long Driveshaft with Kanda Transfer Case with Dana Model 30 Axle Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 29.25 (in) Long Driveshaft with Kanda Transfer Case with Dana Model 30 Axle Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1999 Jeep Cherokee Drive Shaft
$520.13
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual; Transmission Manufacturer: Aisin; Transmission Speeds: 5;
Vehicle Fitment Notes:
with Kanda Transfer Case with Dana Model 30 Axle with 29.25" (743 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with Kanda Transfer Case with Dana Model 30 Axle with 29.25" (743 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1999 Jeep Cherokee Drive Shaft
$531.27
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: RWD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
w/Sales Code DRA (Corporate 8.25 Rear Axle)
w/Sales Code DRA (Corporate 8.25 Rear Axle)
1999 Jeep Cherokee Drive Shaft
$656.59
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: RWD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
w/Sales Code DRJ (Dana M35/194 mm Rear Axle)
w/Sales Code DRJ (Dana M35/194 mm Rear Axle)
1999 Jeep Cherokee Drive Shaft
$656.59
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: RWD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
w/Sales Code DRM (Dana 35C/194 mm Rear Axle)
w/Sales Code DRM (Dana 35C/194 mm Rear Axle)
1999 Jeep Cherokee Drive Shaft
$495.50
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
1999 Jeep Cherokee Drive Shaft
$420.43
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
1999 Jeep Cherokee Drive Shaft
$606.77
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
1999 Jeep Cherokee Drive Shaft
$653.92
$519.64
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
Sales Code DRA (Chrysler 8.25 In. Axle)
Sales Code DRA (Chrysler 8.25 In. Axle)
1999 Jeep Cherokee Drive Shaft
$692.13
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Vehicle Fitment Notes:
w/Sales Code DRA (Corporate 8.25 Rear Axle)
w/Sales Code DRA (Corporate 8.25 Rear Axle)
1999 Jeep Cherokee Drive Shaft
$699.09
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
w/Sales Code DRJ (Dana M35/194 mm Rear Axle)
w/Sales Code DRJ (Dana M35/194 mm Rear Axle)
1999 Jeep Cherokee Drive Shaft
$699.09
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
w/Sales Code DRM (Dana 35C/194 mm Rear Axle)
w/Sales Code DRM (Dana 35C/194 mm Rear Axle)
1999 Jeep Cherokee Drive Shaft
$699.09
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
w/Sales Code DRA (Corporate 8.25 Rear Axle)
w/Sales Code DRA (Corporate 8.25 Rear Axle)
1999 Jeep Cherokee Drive Shaft Assembly
$482.60
Limited Stock
Condition: New
Ships: Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Front
Required Per Vehicle: 1
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Transmission Control Type: Automatic;
Drive Type: 4WD; Transmission Control Type: Automatic;
1999 Jeep Cherokee Drive Shaft Assembly
$482.60
Limited Stock
Condition: New
Ships: Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Front
Required Per Vehicle: 1
Fits: 1999 Jeep Cherokee
Equipped With:
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
With 29 1/4" Prop Shaft
With 29 1/4" Prop Shaft
1999 Jeep Cherokee Drive Shaft Assembly
$613.01
Limited Stock
Condition: New
Ships: Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0);
Vehicle Fitment Notes:
25 5/16 In. Length (Center of Joint to Center of Joint)
25 5/16 In. Length (Center of Joint to Center of Joint)
1999 Jeep Cherokee Drive Shaft Assembly
$640.93
Limited Stock
Condition: New
Ships: Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
27 1/16 In. Length (Center of Joint to Center of Joint)
27 1/16 In. Length (Center of Joint to Center of Joint)
1999 Jeep Cherokee Drive Shaft Assembly
$642.51
Limited Stock
Condition: New
Ships: Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
1999 Jeep Cherokee Drive Shaft Assembly
Call for Pricing
Limited Stock
Condition: New
Ships: Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Pick-Up: Ready in 2-4 Hours Tuesday Feb. 17th
Front
Required Per Vehicle: 1
Made in USA
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
29 1/4 In. Length (Center of Joint to Center of Joint)
29 1/4 In. Length (Center of Joint to Center of Joint)
1999 Jeep Cherokee Drive Shaft Assembly
$551.77
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 805mm ± 35mm - 31 2/3in ± 1 3/8in
Front Driveshaft - End-to-end measurement 805mm ± 35mm - 31 2/3in ± 1 3/8in
1999 Jeep Cherokee Drive Shaft Assembly
$551.77
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 2.5L 150ci L4 (3.88x3.19; 98.5x81.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 710mm ± 30mm - 28in ± 1 1/5in
Front Driveshaft - End-to-end measurement 710mm ± 30mm - 28in ± 1 1/5in
1999 Jeep Cherokee Drive Shaft Assembly
$551.77
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1999 Jeep Cherokee
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 242ci L6 (3.88x3.43; 98.4x87.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 845mm ± 30mm - 33 1/4in ± 1 1/5in
Front Driveshaft - End-to-end measurement 845mm ± 30mm - 33 1/4in ± 1 1/5in