2000 GMC K2500 Drive Shaft
Browse our online catalogue to find original replacement Drive Shafts specifically designed to fit a 2000 GMC K2500.
2000 GMC K2500 Drive Shaft
$686.45
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Transmission Control Type: Manual;
Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 31.89 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 31.89 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
2000 GMC K2500 Drive Shaft
$686.45
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Transmission Control Type: Manual;
Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 7200 lb Gross Vehicle Weight (GVW) with 31.89" (810 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 7200 lb Gross Vehicle Weight (GVW) with 31.89" (810 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
2000 GMC K2500 Drive Shaft
$683.95
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Transmission Control Type: Automatic; Transmission Speeds: 4;
Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 31.73 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 31.73 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
2000 GMC K2500 Drive Shaft
$683.95
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Transmission Control Type: Automatic; Transmission Speeds: 4;
Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 31.73 (in) Long Driveshaft with 8600 (lb) Gross Vehicle Weight (GVW) Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 31.73 (in) Long Driveshaft with 8600 (lb) Gross Vehicle Weight (GVW) Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
2000 GMC K2500 Drive Shaft
$683.95
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Transmission Control Type: Automatic; Transmission Speeds: 4;
Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 7200 lb Gross Vehicle Weight (GVW) with 31.73" (806 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 7200 lb Gross Vehicle Weight (GVW) with 31.73" (806 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
2000 GMC K2500 Drive Shaft
$683.95
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Transmission Control Type: Automatic; Transmission Speeds: 4;
Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 8600 lb Gross Vehicle Weight (GVW) with 31.73" (806 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 8600 lb Gross Vehicle Weight (GVW) with 31.73" (806 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
2000 GMC K2500 Drive Shaft
$448.52
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Wheel Base: 359.4cm (141.5in.);
Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Wheel Base: 359.4cm (141.5in.);
2000 GMC K2500 Drive Shaft
$362.37
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Drive Type: 4WD; Transmission Control Type: Manual;
Drive Type: 4WD; Transmission Control Type: Manual;
Vehicle Fitment Notes:
ID No. DAS
ID No. DAS
2000 GMC K2500 Drive Shaft
$1,367.01
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW)
2000 GMC K2500 Drive Shaft
$1,367.01
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW)
2000 GMC K2500 Drive Shaft
$1,367.01
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW)
2000 GMC K2500 Drive Shaft
$1,385.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code 1TA (Full Floating Axle) w/RPO Code C6P (8,600 Lb. GVW)
2 Piece Shaft Assembly w/RPO Code 1TA (Full Floating Axle) w/RPO Code C6P (8,600 Lb. GVW)
2000 GMC K2500 Drive Shaft
$1,385.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Fuel Type: DIESEL; Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Fuel Type: DIESEL; Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW)
2000 GMC K2500 Drive Shaft
$1,385.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW)
2000 GMC K2500 Drive Shaft
$727.75
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Automatic; Wheel Base: 359.4cm (141.5in.);
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Automatic; Wheel Base: 359.4cm (141.5in.);
2000 GMC K2500 Drive Shaft
$727.75
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Automatic; Wheel Base: 359.4cm (141.5in.);
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Automatic; Wheel Base: 359.4cm (141.5in.);
2000 GMC K2500 Drive Shaft
$1,157.73
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 359.4cm (141.5in.);
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 359.4cm (141.5in.);
2000 GMC K2500 Drive Shaft
$362.37
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Drive Type: 4WD; Transmission Control Type: Automatic;
Drive Type: 4WD; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
ID No. DAT wo/RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
ID No. DAT wo/RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)
2000 GMC K2500 Drive Shaft
$664.83
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Automatic; Wheel Base: 334.0cm (131.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Automatic; Wheel Base: 334.0cm (131.5in.);
Vehicle Fitment Notes:
Classic Body Style
Classic Body Style
2000 GMC K2500 Drive Shaft
$756.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Manual; Transmission Code: NV4500/MW3; Wheel Base: 334.0cm (131.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Manual; Transmission Code: NV4500/MW3; Wheel Base: 334.0cm (131.5in.);
Vehicle Fitment Notes:
wo/RPO Code 1TA (Full Floating Axle)
wo/RPO Code 1TA (Full Floating Axle)
2000 GMC K2500 Drive Shaft
$756.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Manual; Transmission Code: NV4500/MW3; Wheel Base: 334.0cm (131.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Manual; Transmission Code: NV4500/MW3; Wheel Base: 334.0cm (131.5in.);
2000 GMC K2500 Drive Shaft
$756.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 2000 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Manual; Transmission Code: NV4500/MW3; Wheel Base: 334.0cm (131.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Manual; Transmission Code: NV4500/MW3; Wheel Base: 334.0cm (131.5in.);
2000 GMC K2500 Drive Shaft Assembly
$346.84
Limited Stock
Condition: New
Ships: Friday Feb. 13th
Pick-Up: Ready in 2-4 Hours Friday Feb. 13th
Pick-Up: Ready in 2-4 Hours Friday Feb. 13th
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Transmission Control Type: Manual; Transmission Speeds: 5;
Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
With 30 1/8" Prop Shaft
With 30 1/8" Prop Shaft
2000 GMC K2500 Drive Shaft Assembly
$296.60
Limited Stock
Condition: New
Ships: Friday Feb. 13th
Pick-Up: Ready in 2-4 Hours Friday Feb. 13th
Pick-Up: Ready in 2-4 Hours Friday Feb. 13th
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Transmission Control Type: Automatic;
Transmission Control Type: Automatic;
Vehicle Fitment Notes:
7200 lb. GVW 8600 lb. GVW With 2 Speed Push Button Control
7200 lb. GVW 8600 lb. GVW With 2 Speed Push Button Control
2000 GMC K2500 Drive Shaft Assembly
$416.56
Limited Stock
Condition: New
Ships: Friday Feb. 13th
Pick-Up: Ready in 2-4 Hours Friday Feb. 13th
Pick-Up: Ready in 2-4 Hours Friday Feb. 13th
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Transmission Control Type: Manual; Transmission Speeds: 5;
Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
7200 lb. GVW
7200 lb. GVW
2000 GMC K2500 Drive Shaft Assembly
$301.63
Limited Stock
Condition: New
Ships: Friday Feb. 13th
Pick-Up: Ready in 2-4 Hours Friday Feb. 13th
Pick-Up: Ready in 2-4 Hours Friday Feb. 13th
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Transmission Control Type: Automatic; Transmission Speeds: 4;
Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
7200 lb. GVW
7200 lb. GVW
2000 GMC K2500 Drive Shaft Assembly
$406.85
Limited Stock
Condition: New
Ships: Friday Feb. 13th
Pick-Up: Ready in 2-4 Hours Friday Feb. 13th
Pick-Up: Ready in 2-4 Hours Friday Feb. 13th
Rear
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 359.4cm (141.5in.);
Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 359.4cm (141.5in.);
Vehicle Fitment Notes:
with Aluminum Driveshaft
with Aluminum Driveshaft
2000 GMC K2500 Drive Shaft Assembly
$418.15
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 2000 GMC K2500
Equipped With:
Drive Type: 4WD; Transmission Control Type: Automatic;
Drive Type: 4WD; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 875mm ± 20mm - 34 4/9in ± 7/9in
Front Driveshaft - End-to-end measurement 875mm ± 20mm - 34 4/9in ± 7/9in