1994 GMC K2500 Drive Shaft
Browse our online catalogue to find original replacement Drive Shafts specifically designed to fit a 1994 GMC K2500.
1994 GMC K2500 Drive Shaft
$426.47
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Vehicle Fitment Notes:
with 30 (in) Long Driveshaft with 8600 (lb) Gross Vehicle Weight (GVW) with Yoke at Transfer Case Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30 (in) Long Driveshaft with 8600 (lb) Gross Vehicle Weight (GVW) with Yoke at Transfer Case Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1994 GMC K2500 Drive Shaft
$426.47
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Vehicle Fitment Notes:
with 8600 lb Gross Vehicle Weight (GVW) with 30" (762 mm) Long Driveshaft with Yoke at Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 8600 lb Gross Vehicle Weight (GVW) with 30" (762 mm) Long Driveshaft with Yoke at Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1994 GMC K2500 Drive Shaft
$616.45
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1994 GMC K2500
Equipped With:
Fuel Type: GAS;
Fuel Type: GAS;
Vehicle Fitment Notes:
with 30.24 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side Supplied as New
with 30.24 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side Supplied as New
1994 GMC K2500 Drive Shaft
$616.45
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1994 GMC K2500
Equipped With:
Fuel Type: GAS;
Fuel Type: GAS;
Vehicle Fitment Notes:
with 7200 lb Gross Vehicle Weight (GVW) with 30.24" (768 mm) Long Driveshaft Supplied as New Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 7200 lb Gross Vehicle Weight (GVW) with 30.24" (768 mm) Long Driveshaft Supplied as New Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1994 GMC K2500 Drive Shaft
$695.39
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Fuel Type: DIESEL; Transmission Control Type: Automatic;
Fuel Type: DIESEL; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 28.74 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 28.74 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1994 GMC K2500 Drive Shaft
$695.39
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Fuel Type: DIESEL; Transmission Control Type: Automatic;
Fuel Type: DIESEL; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with 7200 lb Gross Vehicle Weight (GVW) with 28.74" (730 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 7200 lb Gross Vehicle Weight (GVW) with 28.74" (730 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1994 GMC K2500 Drive Shaft
$448.52
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 359.4cm (141.5in.);
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 359.4cm (141.5in.);
1994 GMC K2500 Drive Shaft
$420.07
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Drive Type: 4WD; Transmission Control Type: Manual;
Drive Type: 4WD; Transmission Control Type: Manual;
Vehicle Fitment Notes:
w/RPO Code C6P (8,600 Lb. GVW)
w/RPO Code C6P (8,600 Lb. GVW)
1994 GMC K2500 Drive Shaft
$1,000.13
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Fuel Type: DIESEL; Transmission Control Type: Automatic; Transmission Code: 4L80-E;
Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Fuel Type: DIESEL; Transmission Control Type: Automatic; Transmission Code: 4L80-E;
Vehicle Fitment Notes:
ID Code CMJ
ID Code CMJ
1994 GMC K2500 Drive Shaft
$1,210.25
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 4.3L 262ci V6 (4.00x3.48; 101.6x88.4); Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 4.3L 262ci V6 (4.00x3.48; 101.6x88.4); Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,210.25
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 4.3L 262ci V6 (4.00x3.48; 101.6x88.4); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 4.3L 262ci V6 (4.00x3.48; 101.6x88.4); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,210.25
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,210.25
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,210.25
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C5Z (7,200 Lb. GVW)
2 Piece Shaft Assembly w/RPO Code C5Z (7,200 Lb. GVW)
1994 GMC K2500 Drive Shaft
$1,210.25
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C5Z (7,200 Lb. GVW)
2 Piece Shaft Assembly w/RPO Code C5Z (7,200 Lb. GVW)
1994 GMC K2500 Drive Shaft
$1,367.01
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,367.01
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,367.01
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,367.01
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,367.01
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,367.01
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Manual; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,385.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,385.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Fuel Type: DIESEL; Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Fuel Type: DIESEL; Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$1,385.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly w/RPO Code C6P (8,600 Lb. GVW) wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$842.70
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 359.4cm (141.5in.);
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 359.4cm (141.5in.);
1994 GMC K2500 Drive Shaft
$842.70
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 359.4cm (141.5in.);
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Transmission Control Type: Automatic; Transmission Code: 4L60-E; Wheel Base: 359.4cm (141.5in.);
1994 GMC K2500 Drive Shaft
$381.39
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Drive Type: 4WD; Transmission Control Type: Automatic;
Drive Type: 4WD; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
ID Code CKL
ID Code CKL
1994 GMC K2500 Drive Shaft
$381.39
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Drive Type: 4WD; Transmission Control Type: Manual; Transmission Code: MT8; Transmission Speeds: 5;
Drive Type: 4WD; Transmission Control Type: Manual; Transmission Code: MT8; Transmission Speeds: 5;
Vehicle Fitment Notes:
wo/RPO Code C6P (8,600 Lb. GVW)
wo/RPO Code C6P (8,600 Lb. GVW)
1994 GMC K2500 Drive Shaft
$381.39
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Drive Type: 4WD; Transmission Control Type: Manual; Transmission Code: NV3500/MG5; Transmission Speeds: 5;
Drive Type: 4WD; Transmission Control Type: Manual; Transmission Code: NV3500/MG5; Transmission Speeds: 5;
Vehicle Fitment Notes:
wo/RPO Code C6P (8,600 Lb. GVW)
wo/RPO Code C6P (8,600 Lb. GVW)
1994 GMC K2500 Drive Shaft
$664.83
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 334.0cm (131.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 334.0cm (131.5in.);
1994 GMC K2500 Drive Shaft
$756.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Manual; Transmission Code: MT8; Wheel Base: 334.0cm (131.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Manual; Transmission Code: MT8; Wheel Base: 334.0cm (131.5in.);
1994 GMC K2500 Drive Shaft
$756.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Manual; Transmission Code: MT8; Wheel Base: 334.0cm (131.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 6.5L 395ci V8 (4.06x3.82; 103.0x97.0); Transmission Control Type: Manual; Transmission Code: MT8; Wheel Base: 334.0cm (131.5in.);
Vehicle Fitment Notes:
wo/RPO Code 1TA (Full Floating Axle)
wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft
$756.43
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Manual; Transmission Code: MT8; Wheel Base: 334.0cm (131.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Engine Base: 7.4L 454ci V8 (4.25x4.00; 108.0x101.6); Transmission Control Type: Manual; Transmission Code: MT8; Wheel Base: 334.0cm (131.5in.);
Vehicle Fitment Notes:
wo/RPO Code 1TA (Full Floating Axle)
wo/RPO Code 1TA (Full Floating Axle)
1994 GMC K2500 Drive Shaft Assembly
$279.31
Limited Stock
Condition: New
Ships: Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Front
Required Per Vehicle: 1
Fits: 1994 GMC K2500
Equipped With:
Drive Type: 4WD; Fuel Type: GAS;
Drive Type: 4WD; Fuel Type: GAS;
Vehicle Fitment Notes:
With 28 1/2" Prop Shaft
With 28 1/2" Prop Shaft
1994 GMC K2500 Drive Shaft Assembly
$406.85
Limited Stock
Condition: New
Ships: Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Rear
Required Per Vehicle: 1
Fits: 1994 GMC K2500
Equipped With:
Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 359.4cm (141.5in.);
Body Type: Extended Cab Pickup; Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 359.4cm (141.5in.);
Vehicle Fitment Notes:
with Aluminum Driveshaft
with Aluminum Driveshaft
1994 GMC K2500 Drive Shaft Assembly
$316.40
Limited Stock
Condition: New
Ships: Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Front
Required Per Vehicle: 1
Fits: 1994 GMC K2500
Vehicle Fitment Notes:
With 30" Prop Shaft With 8600 lb GVW
With 30" Prop Shaft With 8600 lb GVW
1994 GMC K2500 Drive Shaft Assembly
$306.22
Limited Stock
Condition: New
Ships: Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Front
Required Per Vehicle: 1
Fits: 1994 GMC K2500
Equipped With:
Fuel Type: DIESEL; Transmission Control Type: Automatic;
Fuel Type: DIESEL; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
With 28 3/4" Prop Shaft
With 28 3/4" Prop Shaft
1994 GMC K2500 Drive Shaft Assembly
Call for Pricing
Limited Stock
Condition: New
Ships: Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Pick-Up: Ready in 2-4 Hours Monday Feb. 16th
Rear
Required Per Vehicle: 1
Fits: 1994 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 334.0cm (131.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Standard Cab Pickup; Transmission Control Type: Automatic; Transmission Code: 4L80-E; Wheel Base: 334.0cm (131.5in.);
1994 GMC K2500 Drive Shaft Assembly
$418.15
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1994 GMC K2500
Equipped With:
Drive Type: 4WD; Transmission Control Type: Automatic;
Drive Type: 4WD; Transmission Control Type: Automatic;
Vehicle Fitment Notes:
ID Code CKL - Front Driveshaft - End-to-end measurement 800mm ± 10mm
ID Code CKL - Front Driveshaft - End-to-end measurement 800mm ± 10mm
1994 GMC K2500 Drive Shaft Assembly
$418.15
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1994 GMC K2500
Equipped With:
Drive Type: 4WD; Transmission Code: MT8;
Drive Type: 4WD; Transmission Code: MT8;
Vehicle Fitment Notes:
Without RPO Code C6P and GVW 8,600 LBS - Front Driveshaft - End-to-end measurement 800mm ± 10mm
Without RPO Code C6P and GVW 8,600 LBS - Front Driveshaft - End-to-end measurement 800mm ± 10mm
1994 GMC K2500 Drive Shaft Assembly
$418.15
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1994 GMC K2500
Equipped With:
Drive Type: 4WD; Transmission Code: NV3500/MG5;
Drive Type: 4WD; Transmission Code: NV3500/MG5;
Vehicle Fitment Notes:
Without RPO Code C6P and GVW 8,600 LBS - Front Driveshaft - End-to-end measurement 800mm ± 10mm
Without RPO Code C6P and GVW 8,600 LBS - Front Driveshaft - End-to-end measurement 800mm ± 10mm