1989 GMC K2500 Drive Shaft
Browse our online catalogue to find original replacement Drive Shafts specifically designed to fit a 1989 GMC K2500.
1989 GMC K2500 Drive Shaft
$426.47
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1989 GMC K2500
Vehicle Fitment Notes:
with 30 (in) Long Driveshaft with 8600 (lb) Gross Vehicle Weight (GVW) with Yoke at Transfer Case Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30 (in) Long Driveshaft with 8600 (lb) Gross Vehicle Weight (GVW) with Yoke at Transfer Case Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1989 GMC K2500 Drive Shaft
$426.47
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1989 GMC K2500
Vehicle Fitment Notes:
with 8600 lb Gross Vehicle Weight (GVW) with 30" (762 mm) Long Driveshaft with Yoke at Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 8600 lb Gross Vehicle Weight (GVW) with 30" (762 mm) Long Driveshaft with Yoke at Transfer Case Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1989 GMC K2500 Drive Shaft
$616.45
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1989 GMC K2500
Equipped With:
Fuel Type: GAS;
Fuel Type: GAS;
Vehicle Fitment Notes:
with 30.24 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side Supplied as New
with 30.24 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side Supplied as New
1989 GMC K2500 Drive Shaft
$616.45
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1989 GMC K2500
Equipped With:
Fuel Type: GAS;
Fuel Type: GAS;
Vehicle Fitment Notes:
with 7200 lb Gross Vehicle Weight (GVW) with 30.24" (768 mm) Long Driveshaft Supplied as New Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 7200 lb Gross Vehicle Weight (GVW) with 30.24" (768 mm) Long Driveshaft Supplied as New Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1989 GMC K2500 Drive Shaft
$420.07
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1989 GMC K2500
Equipped With:
Drive Type: 4WD;
Drive Type: 4WD;
Vehicle Fitment Notes:
5th Digit of VIN is K w/RPO Code C6P (8,600 Lb. GVW)
5th Digit of VIN is K w/RPO Code C6P (8,600 Lb. GVW)
1989 GMC K2500 Drive Shaft
$1,210.25
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1989 GMC K2500
Equipped With:
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Wheel Base: 395.0cm (155.5in.);
Bed Length: 96.0 inches 243.8 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Wheel Base: 395.0cm (155.5in.);
Vehicle Fitment Notes:
2 Piece Shaft Assembly wo/RPO Code 1TA (Full Floating Axle)
2 Piece Shaft Assembly wo/RPO Code 1TA (Full Floating Axle)
1989 GMC K2500 Drive Shaft
$842.70
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1989 GMC K2500
Equipped With:
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Wheel Base: 359.4cm (141.5in.);
Bed Length: 78.0 inches 198.1 cm; Body Type: Extended Cab Pickup; Drive Type: 4WD; Wheel Base: 359.4cm (141.5in.);
1989 GMC K2500 Drive Shaft
$381.39
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1989 GMC K2500
Equipped With:
Drive Type: 4WD;
Drive Type: 4WD;
Vehicle Fitment Notes:
w/RPO Code C5Z (7,200 Lb. GVW)
w/RPO Code C5Z (7,200 Lb. GVW)
1989 GMC K2500 Drive Shaft Assembly
$279.31
Limited Stock
Condition: New
Ships: Monday Feb. 23rd
Pick-Up: Ready in 2-4 Hours (Order before 10:30 AM)
Pick-Up: Ready in 2-4 Hours (Order before 10:30 AM)
Front
Required Per Vehicle: 1
Fits: 1989 GMC K2500
Equipped With:
Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Engine VIN: K; Fuel Type: GAS;
Drive Type: 4WD; Engine Base: 5.7L 350ci V8 (4.00x3.48; 101.6x88.5); Engine VIN: K; Fuel Type: GAS;
Vehicle Fitment Notes:
7200 lb. GVW With 28 1/2 In. Prop Shaft With 6 Lug Wheel
7200 lb. GVW With 28 1/2 In. Prop Shaft With 6 Lug Wheel
1989 GMC K2500 Drive Shaft Assembly
$316.40
Limited Stock
Condition: New
Ships: Monday Feb. 23rd
Pick-Up: Ready in 2-4 Hours (Order before 10:30 AM)
Pick-Up: Ready in 2-4 Hours (Order before 10:30 AM)
Front
Required Per Vehicle: 1
Fits: 1989 GMC K2500
Vehicle Fitment Notes:
With 30" Prop Shaft With 8600 lb GVW
With 30" Prop Shaft With 8600 lb GVW
1989 GMC K2500 Drive Shaft Assembly
$418.15
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1989 GMC K2500
Equipped With:
Drive Type: 4WD;
Drive Type: 4WD;
Vehicle Fitment Notes:
With RPO Code C5Z and GVW 7,200 LBS - Front Driveshaft - End-to-end measurement 800mm ± 10mm
With RPO Code C5Z and GVW 7,200 LBS - Front Driveshaft - End-to-end measurement 800mm ± 10mm