1998 Ford Windstar Engine Control Module
Browse our online catalogue to find original replacement Engine Control Modules specifically designed to fit a 1998 Ford Windstar.
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-56K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag EPTx/YHYx
This Unit is Pre-Programmed at the Factory with Calibration # 8-56K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag EPTx/YHYx
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 8-56K without Tear Tag EPTx/YHYx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-56K without Tear Tag EPTx/YHYx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 8-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag BHCx , FRZx
This Unit is Pre-Programmed at the Factory with Calibration # 8-62J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag BHCx , FRZx
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62J without Tear Tag BHCx , FRZx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62J without Tear Tag BHCx , FRZx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag FLBx, LCCx
This Unit is Pre-Programmed at the Factory with Calibration # 8-62K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag FLBx, LCCx
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62K without Tear Tag FLBx, LCCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62K without Tear Tag FLBx, LCCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-62S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-62T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-56Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag FGAx/TLWx
This Unit is Pre-Programmed at the Factory with Calibration # 8-56Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag FGAx/TLWx
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 8-56Q without Tear Tag FGAx/TLWx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-56Q without Tear Tag FGAx/TLWx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag FTCx
This Unit is Pre-Programmed at the Factory with Calibration # 8-62Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag FTCx
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62Q without Tear Tag FTCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62Q without Tear Tag FTCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag GCLx
This Unit is Pre-Programmed at the Factory with Calibration # 8-62P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood without Tear Tag GCLx
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62P without Tear Tag GCLx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62P without Tear Tag GCLx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-56K with Tear Tag EPTx/YHYx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-56K with Tear Tag EPTx/YHYx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 8-56K with Tear Tag EPTx/YHYx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-56K with Tear Tag EPTx/YHYx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-56Q with Tear Tag FGAx/TLWx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-56Q with Tear Tag FGAx/TLWx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 8-56Q with Tear Tag FGAx/TLWx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-56Q with Tear Tag FGAx/TLWx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62J with Tear Tag BHCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-62J with Tear Tag BHCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62J with Tear Tag BHCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62J with Tear Tag BHCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62J with Tear Tag FRZx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-62J with Tear Tag FRZx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62J with Tear Tag FRZx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62J with Tear Tag FRZx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62K with Tear Tag FLBx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-62K with Tear Tag FLBx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62K with Tear Tag FLBx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62K with Tear Tag FLBx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62K with Tear Tag LCCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-62K with Tear Tag LCCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62K with Tear Tag LCCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62K with Tear Tag LCCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62P with Tear Tag GCLx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-62P with Tear Tag GCLx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62P with Tear Tag GCLx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62P with Tear Tag GCLx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 8-62Q with Tear Tag FTCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 8-62Q with Tear Tag FTCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 8-62Q with Tear Tag FTCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-62Q with Tear Tag FTCx Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-4C1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-4C1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-4C1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-4C1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-4C1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-4C1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1998 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-4C1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-4C1 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required