1995 Ford Windstar Engine Control Module
Browse our online catalogue to find original replacement Engine Control Modules specifically designed to fit a 1995 Ford Windstar.
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
ID #(s) ML1-311 This Unit is Pre-Programmed at the Factory with Calibration # 5-56K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) ML1-311 This Unit is Pre-Programmed at the Factory with Calibration # 5-56K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 5-56K ID #(s) ML1-311 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-56K ID #(s) ML1-311 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
ID #(s) ML1-311 This Unit is Pre-Programmed at the Factory with Calibration # 5-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) ML1-311 This Unit is Pre-Programmed at the Factory with Calibration # 5-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 5-56P ID #(s) ML1-311 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-56P ID #(s) ML1-311 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
ID #(s) ML1-211 This Unit is Pre-Programmed at the Factory with Calibration # 5-56K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) ML1-211 This Unit is Pre-Programmed at the Factory with Calibration # 5-56K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 5-56K ID #(s) ML1-211 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-56K ID #(s) ML1-211 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 4-62S-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 4-62S-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 4-62S-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 4-62S-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 4-62J-R00, 4-62J-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 4-62J-R00, 4-62J-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 4-62J-R00, 4-62J-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 4-62J-R00, 4-62J-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 4-62J-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 4-62J-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 4-62J-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 4-62J-R11 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
ID #(s) ML1-211 This Unit is Pre-Programmed at the Factory with Calibration # 5-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) ML1-211 This Unit is Pre-Programmed at the Factory with Calibration # 5-56P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 5-56P ID #(s) ML1-211 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-56P ID #(s) ML1-211 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 4-62S-R00, 4-62S-R05, 4-62S-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 4-62S-R00, 4-62S-R05, 4-62S-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
with Calibration # 4-62S-R00, 4-62S-R05, 4-62S-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 4-62S-R00, 4-62S-R05, 4-62S-R10 Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-113 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-113 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Engine Base: 3.8L 232ci V6 (3.81x3.39; 96.8x86.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-113 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-113 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-311 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-311 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1995 Ford Windstar Engine Control Module
Required Per Vehicle: 1
Fits: 1995 Ford Windstar
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-311 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-311 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required