1997 Ford Ranger Drive Shaft
Browse our online catalogue to find original replacement Drive Shafts specifically designed to fit a 1997 Ford Ranger.
1997 Ford Ranger Drive Shaft
$799.80
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft with 29.21" (742 mm) Long Driveshaft Supplied as New
Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft with 29.21" (742 mm) Long Driveshaft Supplied as New
1997 Ford Ranger Drive Shaft
$799.80
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
with 29.21 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
with 29.21 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New
1997 Ford Ranger Drive Shaft
$452.36
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft with 30.75" (781 mm) Long Driveshaft Obsolete
Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft with 30.75" (781 mm) Long Driveshaft Obsolete
1997 Ford Ranger Drive Shaft
$452.36
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
with 30.75 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 30.75 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1997 Ford Ranger Drive Shaft
$452.36
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1997 Ford Ranger Drive Shaft
$452.36
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1997 Ford Ranger Drive Shaft
$539.65
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: 4WD;
Drive Type: 4WD;
Vehicle Fitment Notes:
with 45.87 (in) Long Driveshaft Obsolete Measurement taken from end of flange face to end of flange face
with 45.87 (in) Long Driveshaft Obsolete Measurement taken from end of flange face to end of flange face
1997 Ford Ranger Drive Shaft
$539.65
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: 4WD;
Drive Type: 4WD;
Vehicle Fitment Notes:
with 45.87" (1165 mm) Long Driveshaft Obsolete Measurement taken from end of flange face to end of flange face
with 45.87" (1165 mm) Long Driveshaft Obsolete Measurement taken from end of flange face to end of flange face
1997 Ford Ranger Drive Shaft
$562.39
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Transmission Control Type: Manual;
1997 Ford Ranger Drive Shaft
$562.39
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
1997 Ford Ranger Drive Shaft
$634.77
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Drive Type: 4WD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
1997 Ford Ranger Drive Shaft
$634.77
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Transmission Control Type: Automatic;
1997 Ford Ranger Drive Shaft
$930.08
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Automatic; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Automatic; Wheel Base: 289.6cm (114.0in.);
1997 Ford Ranger Drive Shaft
$930.08
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Transmission Control Type: Automatic; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Transmission Control Type: Automatic; Wheel Base: 289.6cm (114.0in.);
1997 Ford Ranger Drive Shaft
$930.08
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic; Wheel Base: 289.6cm (114.0in.);
1997 Ford Ranger Drive Shaft
$858.77
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Wheel Base: 274.3cm (108.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Wheel Base: 274.3cm (108.0in.);
1997 Ford Ranger Drive Shaft
$839.96
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Vehicle Fitment Notes:
wo/4.56 Axle Ratio
wo/4.56 Axle Ratio
1997 Ford Ranger Drive Shaft
$939.89
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Automatic; Wheel Base: 274.3cm (108.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Automatic; Wheel Base: 274.3cm (108.0in.);
Vehicle Fitment Notes:
w/4.10 Axle Ratio
w/4.10 Axle Ratio
1997 Ford Ranger Drive Shaft
$881.22
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Automatic; Wheel Base: 274.3cm (108.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Automatic; Wheel Base: 274.3cm (108.0in.);
Vehicle Fitment Notes:
w/3.73 Axle Ratio
w/3.73 Axle Ratio
1997 Ford Ranger Drive Shaft
$881.22
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Transmission Control Type: Automatic; Wheel Base: 274.3cm (108.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Transmission Control Type: Automatic; Wheel Base: 274.3cm (108.0in.);
1997 Ford Ranger Drive Shaft
$881.22
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic; Wheel Base: 274.3cm (108.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic; Wheel Base: 274.3cm (108.0in.);
1997 Ford Ranger Drive Shaft
$1,076.60
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1997 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Extended Cab Pickup; Drive Type: RWD; Transmission Control Type: Automatic; Wheel Base: 317.5cm (125.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Extended Cab Pickup; Drive Type: RWD; Transmission Control Type: Automatic; Wheel Base: 317.5cm (125.0in.);
Vehicle Fitment Notes:
Exc. Splash
Exc. Splash
1997 Ford Ranger Drive Shaft
$458.38
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Drive Type: RWD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with 59.06 (in) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New
with 59.06 (in) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New
1997 Ford Ranger Drive Shaft
$458.38
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Drive Type: RWD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with 59.06" (1500 mm) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New
with 59.06" (1500 mm) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New
1997 Ford Ranger Drive Shaft
$458.38
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
with 59.06 (in) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New
with 59.06 (in) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New
1997 Ford Ranger Drive Shaft
$458.38
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
with 59.06" (1500 mm) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New
with 59.06" (1500 mm) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New
1997 Ford Ranger Drive Shaft Assembly
$544.07
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Front
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Vehicle Fitment Notes:
With 30 3/4" Prop Shaft
With 30 3/4" Prop Shaft
1997 Ford Ranger Drive Shaft Assembly
$544.07
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Front
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
With 30 3/4" Prop Shaft
With 30 3/4" Prop Shaft
1997 Ford Ranger Drive Shaft Assembly
$544.07
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Front
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
With 30 3/4" Prop Shaft
With 30 3/4" Prop Shaft
1997 Ford Ranger Drive Shaft Assembly
$544.07
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Front
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
1997 Ford Ranger Drive Shaft Assembly
$631.72
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Rear
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: 4WD;
Drive Type: 4WD;
Vehicle Fitment Notes:
With 40 1/2" Prop Shaft
With 40 1/2" Prop Shaft
1997 Ford Ranger Drive Shaft Assembly
$597.34
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 746mm ± 10mm - 29 3/8in ± 3/5in
Front Driveshaft - End-to-end measurement 746mm ± 10mm - 29 3/8in ± 3/5in
1997 Ford Ranger Drive Shaft Assembly
$597.34
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Fits: 1997 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
Front Driveshaft - End-to-end measurement 746mm ± 10mm - 29 3/8in ± 3/5in
Front Driveshaft - End-to-end measurement 746mm ± 10mm - 29 3/8in ± 3/5in