1996 Ford Ranger Engine Control Module
Browse our online catalogue to find original replacement Engine Control Modules specifically designed to fit a 1996 Ford Ranger.
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 5-49A-R15, R16, 6-49A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 5-49A-R15, R16, 6-49A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
with Calibration # 5-49A-R15, R16, 6-49A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-49A-R15, R16, 6-49A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
ID #(s) F57F-BZB, BZC This Unit is Pre-Programmed at the Factory with Calibration # 6-49B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F57F-BZB, BZC This Unit is Pre-Programmed at the Factory with Calibration # 6-49B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
with Calibration # 6-49B ID #(s) F57F-BZB, BZC Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-49B ID #(s) F57F-BZB, BZC Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-49Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-49Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
with Calibration # 6-49Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-49Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-49T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-49T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
with Calibration # 6-49T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-49T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-50A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-50A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
with Calibration # 6-50A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-50A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-50T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-50T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
with Calibration # 6-50T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-50T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-55F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-55F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 6-55F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-55F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-55H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-55H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 6-55H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-55H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-55R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-55R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 6-55R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-55R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-55S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-55S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 6-55S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-55S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 5-56F, 6-56F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 5-56F, 6-56F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
with Calibration # 5-56F, 6-56F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-56F, 6-56F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-56F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-56F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 6-56F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-56F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-56H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-56H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 6-56H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-56H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-56R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-56R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 6-56R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-56R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-56S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-56S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
with Calibration # 6-56S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-56S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-57H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-57H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with Calibration # 6-57H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-57H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-57S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-57S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with Calibration # 6-57S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-57S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 5-57T, 6-57T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 5-57T, 6-57T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with Calibration # 5-57T, 6-57T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-57T, 6-57T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 5-57F, 6-57F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 5-57F, 6-57F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with Calibration # 5-57F, 6-57F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-57F, 6-57F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 5-58F, 6-58F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 5-58F, 6-58F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with Calibration # 5-58F, 6-58F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-58F, 6-58F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 5-58H, 6-58H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 5-58H, 6-58H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with Calibration # 5-58H, 6-58H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-58H, 6-58H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 5-58T, 6-58T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 5-58T, 6-58T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with Calibration # 5-58T, 6-58T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-58T, 6-58T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 5-58S, 6-58S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 5-58S, 6-58S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Drive Type: RWD; Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
with Calibration # 5-58S, 6-58S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 5-58S, 6-58S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-111 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Engine Base: 4.0L 245ci V6 (3.95x3.32; 100.3x84.3);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-112 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-212 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-212 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-212 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-212 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Made in USA
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
ID #(s) F67F-BZC with Calibration # 6-49B First Source - Call For Availability Correct VIN and OE Number required when ordering
ID #(s) F67F-BZC with Calibration # 6-49B First Source - Call For Availability Correct VIN and OE Number required when ordering
1996 Ford Ranger Engine Control Module
Required Per Vehicle: 1
Made in USA
Fits: 1996 Ford Ranger
Equipped With:
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4);
Vehicle Fitment Notes:
with Calibration # 6-49B ID #(s) F67F-BZC First Source - Call For Availability Correct VIN and OE Number required when ordering
with Calibration # 6-49B ID #(s) F67F-BZC First Source - Call For Availability Correct VIN and OE Number required when ordering