1988 Ford Ranger Drive Shaft
Browse our online catalogue to find original replacement Drive Shafts specifically designed to fit a 1988 Ford Ranger.
1988 Ford Ranger Drive Shaft
$487.36
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
Short Wheelbase with 39.80" (1011 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Short Wheelbase with 39.80" (1011 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1988 Ford Ranger Drive Shaft
$487.36
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 39.80 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 39.80 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1988 Ford Ranger Drive Shaft
$487.36
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
Short Wheelbase with 39.80" (1011 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Short Wheelbase with 39.80" (1011 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1988 Ford Ranger Drive Shaft
$487.36
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 39.80 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 39.80 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1988 Ford Ranger Drive Shaft
$663.32
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 5;
Drive Type: 4WD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
Short Wheelbase with 42.24" (1073 mm) Long Driveshaft Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Short Wheelbase with 42.24" (1073 mm) Long Driveshaft Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1988 Ford Ranger Drive Shaft
$663.32
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 5;
Drive Type: 4WD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 42.24 (in) Long Driveshaft Short Wheelbase Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 42.24 (in) Long Driveshaft Short Wheelbase Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1988 Ford Ranger Drive Shaft
$663.32
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
Short Wheelbase with 42.24" (1073 mm) Long Driveshaft Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Short Wheelbase with 42.24" (1073 mm) Long Driveshaft Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1988 Ford Ranger Drive Shaft
$663.32
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 42.24 (in) Long Driveshaft Short Wheelbase Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 42.24 (in) Long Driveshaft Short Wheelbase Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1988 Ford Ranger Drive Shaft
$495.97
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft with 26.50" (673 mm) Long Driveshaft
Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft with 26.50" (673 mm) Long Driveshaft
1988 Ford Ranger Drive Shaft
$495.97
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Sub-Model: STX; Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 26.50 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 26.50 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Ford Ranger Drive Shaft
$495.97
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Transmission Control Type: Automatic; Transmission Speeds: 4;
Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft with 26.50" (673 mm) Long Driveshaft
Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft with 26.50" (673 mm) Long Driveshaft
1988 Ford Ranger Drive Shaft
$495.97
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Transmission Control Type: Automatic; Transmission Speeds: 4;
Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 26.50 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 26.50 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1988 Ford Ranger Drive Shaft
$807.34
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.0L 1989cc 122ci L4 (3.52x3.13; 89.4x79.4); Transmission Control Type: Manual; Wheel Base: 274.3cm (108.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.0L 1989cc 122ci L4 (3.52x3.13; 89.4x79.4); Transmission Control Type: Manual; Wheel Base: 274.3cm (108.0in.);
1988 Ford Ranger Drive Shaft
$807.34
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Manual; Wheel Base: 274.3cm (108.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Manual; Wheel Base: 274.3cm (108.0in.);
1988 Ford Ranger Drive Shaft
$1,188.80
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Extended Cab Pickup; Drive Type: RWD; Transmission Control Type: Automatic; Wheel Base: 317.5cm (125.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Extended Cab Pickup; Drive Type: RWD; Transmission Control Type: Automatic; Wheel Base: 317.5cm (125.0in.);
Vehicle Fitment Notes:
Tagged E67A, E6TZ
Tagged E67A, E6TZ
1988 Ford Ranger Drive Shaft
$1,181.12
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 317.5cm (125.0in.);
Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 317.5cm (125.0in.);
1988 Ford Ranger Drive Shaft
$1,111.08
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Extended Cab Pickup; Drive Type: RWD; Transmission Control Type: Manual; Wheel Base: 317.5cm (125.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Extended Cab Pickup; Drive Type: RWD; Transmission Control Type: Manual; Wheel Base: 317.5cm (125.0in.);
1988 Ford Ranger Drive Shaft
$651.09
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Vehicle Fitment Notes:
ID No. E57A
ID No. E57A
1988 Ford Ranger Drive Shaft
$796.18
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1988 Ford Ranger
Equipped With:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Vehicle Fitment Notes:
ID No. E67A
ID No. E67A
1988 Ford Ranger Drive Shaft Assembly
$610.75
Limited Stock
Condition: New
Ships: Today, Feb. 19th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Rear
Required Per Vehicle: 1
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
With 39 13/16" Prop Shaft
With 39 13/16" Prop Shaft
1988 Ford Ranger Drive Shaft Assembly
$616.01
Limited Stock
Condition: New
Ships: Today, Feb. 19th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Rear
Required Per Vehicle: 1
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 2.3L 140ci L4 (3.78x3.13; 96.0x79.4); Transmission Control Type: Manual;
Vehicle Fitment Notes:
With 42 1/4" Prop Shaft
With 42 1/4" Prop Shaft
1988 Ford Ranger Drive Shaft Assembly
$616.01
Limited Stock
Condition: New
Ships: Today, Feb. 19th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Rear
Required Per Vehicle: 1
Fits: 1988 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Manual;
Vehicle Fitment Notes:
With 42 1/4" Prop Shaft
With 42 1/4" Prop Shaft
1988 Ford Ranger Drive Shaft Assembly
$562.28
Limited Stock
Condition: New
Ships: Today, Feb. 19th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)