1987 Ford Ranger Drive Shaft
Browse our online catalogue to find original replacement Drive Shafts specifically designed to fit a 1987 Ford Ranger.
1987 Ford Ranger Drive Shaft
$487.36
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
Short Wheelbase with 39.80" (1011 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
Short Wheelbase with 39.80" (1011 mm) Long Driveshaft Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1987 Ford Ranger Drive Shaft
$487.36
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 39.80 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
with 39.80 (in) Long Driveshaft Short Wheelbase Obsolete Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side
1987 Ford Ranger Drive Shaft
$530.09
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 26.50 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 26.50 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Ranger Drive Shaft
$530.09
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Sub-Model: STX; Transmission Control Type: Automatic; Transmission Speeds: 4;
Vehicle Fitment Notes:
with 26.50" (673 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 26.50" (673 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Ranger Drive Shaft
$530.09
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 26.50 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 26.50 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Ranger Drive Shaft
$530.09
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Manual; Transmission Speeds: 5;
Vehicle Fitment Notes:
with 26.50" (673 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 26.50" (673 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Ranger Drive Shaft
$1,163.62
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: RWD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
1987 Ford Ranger Drive Shaft
$1,124.98
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Extended Cab Pickup; Drive Type: RWD; Transmission Control Type: Manual; Wheel Base: 317.5cm (125.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Extended Cab Pickup; Drive Type: RWD; Transmission Control Type: Manual; Wheel Base: 317.5cm (125.0in.);
1987 Ford Ranger Drive Shaft
$1,188.80
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Bed Length: 72.0 inches 182.9 cm; Body Type: Extended Cab Pickup; Drive Type: RWD; Transmission Control Type: Automatic; Wheel Base: 317.5cm (125.0in.);
Bed Length: 72.0 inches 182.9 cm; Body Type: Extended Cab Pickup; Drive Type: RWD; Transmission Control Type: Automatic; Wheel Base: 317.5cm (125.0in.);
Vehicle Fitment Notes:
Tagged E67A, E6TZ
Tagged E67A, E6TZ
1987 Ford Ranger Drive Shaft
$1,181.12
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 317.5cm (125.0in.);
Body Type: Extended Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 317.5cm (125.0in.);
1987 Ford Ranger Drive Shaft
$651.09
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Vehicle Fitment Notes:
ID No. E57A
ID No. E57A
1987 Ford Ranger Drive Shaft
$796.18
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Bed Length: 84.0 inches 213.4 cm; Body Type: Standard Cab Pickup; Drive Type: 4WD; Transmission Control Type: Manual; Wheel Base: 289.6cm (114.0in.);
Vehicle Fitment Notes:
ID No. E67A
ID No. E67A
1987 Ford Ranger Drive Shaft Assembly
$610.75
Limited Stock
Condition: New
Ships: Today, Feb. 18th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Rear
Required Per Vehicle: 1
Fits: 1987 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
With 39 13/16" Prop Shaft
With 39 13/16" Prop Shaft
1987 Ford Ranger Drive Shaft Assembly
Call for Pricing
Limited Stock
Condition: New
Ships: Today, Feb. 18th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Front
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Automatic;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
26 1/2 In. Length (Center of Joint to Center of Joint)
26 1/2 In. Length (Center of Joint to Center of Joint)
1987 Ford Ranger Drive Shaft Assembly
Call for Pricing
Limited Stock
Condition: New
Ships: Today, Feb. 18th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Front
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Ranger
Equipped With:
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 2.9L 177ci V6 (3.66x2.83; 93.0x72.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
26 1/2 In. Length (Center of Joint to Center of Joint)
26 1/2 In. Length (Center of Joint to Center of Joint)