1996 Ford F-250 Engine Control Module
Browse our online catalogue to find original replacement Engine Control Modules specifically designed to fit a 1996 Ford F-250.
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
Over 8500 (lb) Gross Vehicle Weight (GVW) This Unit is Pre-Programmed at the Factory with Calibration # 6-64S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Over 8500 (lb) Gross Vehicle Weight (GVW) This Unit is Pre-Programmed at the Factory with Calibration # 6-64S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-64S Over 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-64S Over 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory Under 8500 (lb) Gross Vehicle Weight (GVW) with Calibration # 6-64S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory Under 8500 (lb) Gross Vehicle Weight (GVW) with Calibration # 6-64S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-64S Under 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-64S Under 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
Over 8500 (lb) Gross Vehicle Weight (GVW) This Unit is Pre-Programmed at the Factory with Calibration # 6-76S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Over 8500 (lb) Gross Vehicle Weight (GVW) This Unit is Pre-Programmed at the Factory with Calibration # 6-76S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-76S Over 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-76S Over 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
Over 8500 (lb) Gross Vehicle Weight (GVW) This Unit is Pre-Programmed at the Factory with Calibration # 6-76T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Over 8500 (lb) Gross Vehicle Weight (GVW) This Unit is Pre-Programmed at the Factory with Calibration # 6-76T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-76T Over 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-76T Over 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-97Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-97Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-97Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-97Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
ID #(s) F6TF-AHA with Calibration # 6-98A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F6TF-AHA with Calibration # 6-98A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-98A ID #(s) F6TF-AHA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
with Calibration # 6-98A ID #(s) F6TF-AHA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-98N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-98N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-98N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-98N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-98P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-98P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-98P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-98P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-98Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-98Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-98Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-98Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-51H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-51H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
with Calibration # 6-51H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-51H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
ID #(s) F6TF-BFA with Calibration # 6-97A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F6TF-BFA with Calibration # 6-97A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-97A ID #(s) F6TF-BFA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
with Calibration # 6-97A ID #(s) F6TF-BFA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
ID #(s) F6TF-BGA with Calibration # 6-98F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F6TF-BGA with Calibration # 6-98F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-98F ID #(s) F6TF-BGA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
with Calibration # 6-98F ID #(s) F6TF-BGA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
ID #(s) F6TF-BJB This Unit is Pre-Programmed at the Factory with Calibration # 6-75A
ID #(s) F6TF-BJB This Unit is Pre-Programmed at the Factory with Calibration # 6-75A
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-75A ID #(s) F6TF-BJB This Unit is Pre-Programmed at the Factory
with Calibration # 6-75A ID #(s) F6TF-BJB This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
ID #(s) F6TF-BKB This Unit is Pre-Programmed at the Factory with Calibration # 6-75A
ID #(s) F6TF-BKB This Unit is Pre-Programmed at the Factory with Calibration # 6-75A
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-75A ID #(s) F6TF-BKB This Unit is Pre-Programmed at the Factory
with Calibration # 6-75A ID #(s) F6TF-BKB This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-52R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-52R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
with Calibration # 6-52R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-52R Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-54E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-54E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
with Calibration # 6-54E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-54E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-54P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-54P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
with Calibration # 6-54P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-54P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-64E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-64E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-64E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-64E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-64H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-64H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-64H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-64H Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
ID #(s) F6UF-NB with Calibration # 6-76A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F6UF-NB with Calibration # 6-76A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-76A ID #(s) F6UF-NB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
with Calibration # 6-76A ID #(s) F6UF-NB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-72J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-72J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
with Calibration # 6-72J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-72J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-54Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-54Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
with Calibration # 6-54Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-54Q Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory Under 8500 (lb) Gross Vehicle Weight (GVW) with Calibration # 6-76S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory Under 8500 (lb) Gross Vehicle Weight (GVW) with Calibration # 6-76S Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-76S Under 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-76S Under 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory Under 8500 (lb) Gross Vehicle Weight (GVW) with Calibration # 6-76T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory Under 8500 (lb) Gross Vehicle Weight (GVW) with Calibration # 6-76T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-76T Under 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-76T Under 8500 lb GVW Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-54J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-54J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
with Calibration # 6-54J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-54J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-54M Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-54M Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
with Calibration # 6-54M Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-54M Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-53F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-53F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
with Calibration # 6-53F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-53F Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-53E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-53E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
with Calibration # 6-53E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-53E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-53G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-53G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
with Calibration # 6-53G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-53G Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-97P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-97P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-97P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-97P Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-98T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-98T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-98T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-98T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-89N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-89N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
with Calibration # 6-89N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-89N Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
ID #(s) F7TF-NA This Unit is Pre-Programmed at the Factory with Calibration # 6-76A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F7TF-NA This Unit is Pre-Programmed at the Factory with Calibration # 6-76A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-76A ID #(s) F7TF-NA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-76A ID #(s) F7TF-NA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-89A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-89A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
with Calibration # 6-89A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-89A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-50V Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-50V Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
with Calibration # 6-50V Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-50V Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-72V Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-72V Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
with Calibration # 6-72V Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-72V Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-421 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-421 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-421 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-421 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
All Calibrations with Module ID DPC-202 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID DPC-202 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-202 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-202 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
All Calibrations with Module ID DPC-203 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID DPC-203 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-203 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-203 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-422 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-442 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Made in USA
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
ID #(s) F6TF-NB with Calibration # 6-75A Obsolete First Source - Call For Availability Correct VIN and OE Number required when ordering
ID #(s) F6TF-NB with Calibration # 6-75A Obsolete First Source - Call For Availability Correct VIN and OE Number required when ordering
1996 Ford F-250 Engine Control Module
Required Per Vehicle: 1
Made in USA
Fits: 1996 Ford F-250
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-75A ID #(s) F6TF-NB First Source - Call For Availability Correct VIN and OE Number required when ordering
with Calibration # 6-75A ID #(s) F6TF-NB First Source - Call For Availability Correct VIN and OE Number required when ordering