1988 Ford F-150 Clutch Kit
Browse our online catalogue to find original replacement Clutch Kits specifically designed to fit a 1988 Ford F-150.
1988 Ford F-150 Clutch Kit
$207.64
In Stock
Condition: New
Ships: Monday Feb. 23rd
Pick-Up: Available Immediately
Pick-Up: Available Immediately
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 5;
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 5;
Vehicle Fitment Notes:
10" Clutch
10" Clutch
1988 Ford F-150 Clutch Kit
$200.01
Limited Stock
Condition: New
Ships: Monday Feb. 23rd
Pick-Up: Ready in 1 Hour Saturday Feb. 21st
Pick-Up: Ready in 1 Hour Saturday Feb. 21st
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 4;
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 4;
Vehicle Fitment Notes:
10" Clutch
10" Clutch
1988 Ford F-150 Clutch Kit
$237.76
Limited Stock
Condition: New
Ships: Monday Feb. 23rd
Pick-Up: Ready in 1 Hour Saturday Feb. 21st
Pick-Up: Ready in 1 Hour Saturday Feb. 21st
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 5;
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 5;
Vehicle Fitment Notes:
When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. 11" Clutch
When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. 11" Clutch
1988 Ford F-150 Clutch Kit
$237.76
Limited Stock
Condition: New
Ships: Monday Feb. 23rd
Pick-Up: Ready in 1 Hour Saturday Feb. 21st
Pick-Up: Ready in 1 Hour Saturday Feb. 21st
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 5;
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 5;
Vehicle Fitment Notes:
11" Clutch
11" Clutch
1988 Ford F-150 Clutch Kit
$237.76
Limited Stock
Condition: New
Ships: Monday Feb. 23rd
Pick-Up: Ready in 1 Hour Saturday Feb. 21st
Pick-Up: Ready in 1 Hour Saturday Feb. 21st
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 5;
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 5;
Vehicle Fitment Notes:
11" Clutch Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150.
11" Clutch Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150.
1988 Ford F-150 Clutch Kit
$237.76
Limited Stock
Condition: New
Ships: Monday Feb. 23rd
Pick-Up: Ready in 1 Hour Saturday Feb. 21st
Pick-Up: Ready in 1 Hour Saturday Feb. 21st
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 5;
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 5;
Vehicle Fitment Notes:
Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150. 11" Clutch
Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150. 11" Clutch
1988 Ford F-150 Clutch Kit
$232.26
Limited Stock
Condition: New
Ships: Same or Next Business Day
Pick-Up: Same Business Day (Order before 11:30am)
Pick-Up: Same Business Day (Order before 11:30am)
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 4;
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 4;
Vehicle Fitment Notes:
Disc friction material width may be less than OEM for increased torque capacity. 11" Clutch When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required.
Disc friction material width may be less than OEM for increased torque capacity. 11" Clutch When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required.
1988 Ford F-150 Clutch Kit
$232.26
Limited Stock
Condition: New
Ships: Same or Next Business Day
Pick-Up: Same Business Day (Order before 11:30am)
Pick-Up: Same Business Day (Order before 11:30am)
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 4;
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 4;
Vehicle Fitment Notes:
When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. Disc friction material width may be less than OEM for increased torque capacity. 11" Clutch
When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. Disc friction material width may be less than OEM for increased torque capacity. 11" Clutch
1988 Ford F-150 Clutch Kit
$232.26
Limited Stock
Condition: New
Ships: Same or Next Business Day
Pick-Up: Same Business Day (Order before 11:30am)
Pick-Up: Same Business Day (Order before 11:30am)
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 4;
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 4;
Vehicle Fitment Notes:
Disc friction material width may be less than OEM for increased torque capacity. Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws.
Disc friction material width may be less than OEM for increased torque capacity. Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws.
1988 Ford F-150 Clutch Kit
$232.26
Limited Stock
Condition: New
Ships: Same or Next Business Day
Pick-Up: Same Business Day (Order before 11:30am)
Pick-Up: Same Business Day (Order before 11:30am)
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 4;
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 4;
Vehicle Fitment Notes:
Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws. Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Disc friction material width may be less than OEM for increased torque capacity.
Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws. Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Disc friction material width may be less than OEM for increased torque capacity.
1988 Ford F-150 Clutch Kit
$232.26
Limited Stock
Condition: New
Ships: Same or Next Business Day
Pick-Up: Same Business Day (Order before 11:30am)
Pick-Up: Same Business Day (Order before 11:30am)
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 4;
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 4;
Vehicle Fitment Notes:
Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Disc friction material width may be less than OEM for increased torque capacity. Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150. Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws.
Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Disc friction material width may be less than OEM for increased torque capacity. Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150. Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws.
1988 Ford F-150 Clutch Kit
$232.26
Limited Stock
Condition: New
Ships: Same or Next Business Day
Pick-Up: Same Business Day (Order before 11:30am)
Pick-Up: Same Business Day (Order before 11:30am)
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 4;
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 4;
Vehicle Fitment Notes:
Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws. Disc friction material width may be less than OEM for increased torque capacity. Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150.
Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws. Disc friction material width may be less than OEM for increased torque capacity. Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150.
1988 Ford F-150 Clutch Kit
$427.31
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 4;
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 4;
Vehicle Fitment Notes:
11" Clutch Heavy-Duty When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required.
11" Clutch Heavy-Duty When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required.
1988 Ford F-150 Clutch Kit
$427.31
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 4;
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 4;
Vehicle Fitment Notes:
When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. Heavy-Duty 11" Clutch
When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. Heavy-Duty 11" Clutch
1988 Ford F-150 Clutch Kit
$427.31
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 4;
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 4;
Vehicle Fitment Notes:
Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Heavy-Duty Refer to LB190 Regarding the Proper Bleeding Procedures for Slave Cylinders without Bleed Screws.
Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Heavy-Duty Refer to LB190 Regarding the Proper Bleeding Procedures for Slave Cylinders without Bleed Screws.
1988 Ford F-150 Clutch Kit
$427.31
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 4;
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 4;
Vehicle Fitment Notes:
Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws. Heavy-Duty
Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws. Heavy-Duty
1988 Ford F-150 Clutch Kit
$427.31
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 4;
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 4;
Vehicle Fitment Notes:
Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws. Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Heavy-Duty Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150.
Refer to LB190 regarding the proper bleeding procedures for slave cylinders without bleed screws. Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Heavy-Duty Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150.
1988 Ford F-150 Clutch Kit
$427.31
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 4;
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 4;
Vehicle Fitment Notes:
Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150. Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Refer to LB190 Regarding the Proper Bleeding Procedures for Slave Cylinders without Bleed Screws. Heavy-Duty
Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150. Match disc to the flywheel prior to installation to avoid interference. Refer to LB120. Refer to LB190 Regarding the Proper Bleeding Procedures for Slave Cylinders without Bleed Screws. Heavy-Duty
1988 Ford F-150 Clutch Kit
$419.05
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 5;
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 5;
Vehicle Fitment Notes:
11" Clutch Heavy-Duty When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. Do not lubricate bearing. Refer to LB192.
11" Clutch Heavy-Duty When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. Do not lubricate bearing. Refer to LB192.
1988 Ford F-150 Clutch Kit
$419.05
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 5;
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 5;
Vehicle Fitment Notes:
Do Not Lubricate Bearing. Refer to LB192. When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. 11" Clutch Heavy-Duty
Do Not Lubricate Bearing. Refer to LB192. When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. 11" Clutch Heavy-Duty
1988 Ford F-150 Clutch Kit
$419.05
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 5;
Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Speeds: 5;
Vehicle Fitment Notes:
When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. Do not lubricate bearing. Refer to LB192. 11" Clutch Heavy-Duty
When upgrading to an 11-inch clutch, six grade 8 3/8"-16 X 1 " bolts with lock washers are required. Do not lubricate bearing. Refer to LB192. 11" Clutch Heavy-Duty
1988 Ford F-150 Clutch Kit
$419.05
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 5;
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 5;
Vehicle Fitment Notes:
Do not lubricate bearing. Refer to LB192. Heavy-Duty
Do not lubricate bearing. Refer to LB192. Heavy-Duty
1988 Ford F-150 Clutch Kit
$419.05
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 5;
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Speeds: 5;
Vehicle Fitment Notes:
Heavy-Duty Do not lubricate bearing. Refer to LB192.
Heavy-Duty Do not lubricate bearing. Refer to LB192.
1988 Ford F-150 Clutch Kit
$419.05
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 5;
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 5;
Vehicle Fitment Notes:
Do not lubricate bearing. Refer to LB192. Heavy-Duty Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150.
Do not lubricate bearing. Refer to LB192. Heavy-Duty Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150.
1988 Ford F-150 Clutch Kit
$419.05
Out of Stock
Condition: New
Required Per Vehicle: 1
Fits: 1988 Ford F-150
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 5;
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Speeds: 5;
Vehicle Fitment Notes:
Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150. Heavy-Duty Do not lubricate bearing. Refer to LB192.
Replace driveshaft center support bearing plate with Ford part #F4TZ-4831A. Refer to LB150. Heavy-Duty Do not lubricate bearing. Refer to LB192.