1998 Ford Econoline Super Duty Engine Control Module
Browse our online catalogue to find original replacement Engine Control Modules specifically designed to fit a 1998 Ford Econoline Super Duty.
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-AAA,AAB,AAC,AAD This Unit is Pre-Programmed at the Factory with Calibration # 8-96E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-AAA,AAB,AAC,AAD This Unit is Pre-Programmed at the Factory with Calibration # 8-96E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96E ID #(s) F8UF-AAA,AAB,AAC,AAD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96E ID #(s) F8UF-AAA,AAB,AAC,AAD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-ABA,ABB This Unit is Pre-Programmed at the Factory with Calibration # 8-96J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-ABA,ABB This Unit is Pre-Programmed at the Factory with Calibration # 8-96J Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96J ID #(s) F8UF-ABA,ABB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96J ID #(s) F8UF-ABA,ABB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-ACA,ACB,ACC,ACD,ACE This Unit is Pre-Programmed at the Factory with Calibration # 8-96T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-ACA,ACB,ACC,ACD,ACE This Unit is Pre-Programmed at the Factory with Calibration # 8-96T Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96T ID #(s) F8UF-ACA,ACB,ACC,ACD,ACE Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96T ID #(s) F8UF-ACA,ACB,ACC,ACD,ACE Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-ADA,ADB,ADC,ADD This Unit is Pre-Programmed at the Factory with Calibration # 8-96W Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-ADA,ADB,ADC,ADD This Unit is Pre-Programmed at the Factory with Calibration # 8-96W Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96W ID #(s) F8UF-ADA,ADB,ADC,ADD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96W ID #(s) F8UF-ADA,ADB,ADC,ADD Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-AEA,AEB,AEC,AED This Unit is Pre-Programmed at the Factory with Calibration # 8-96X Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-AEA,AEB,AEC,AED This Unit is Pre-Programmed at the Factory with Calibration # 8-96X Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96X ID #(s) F8UF-AEA,AEB,AEC,AED Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96X ID #(s) F8UF-AEA,AEB,AEC,AED Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
ID #(s) F8UF-AHA This Unit is Pre-Programmed at the Factory with Calibration # 8-96Y Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F8UF-AHA This Unit is Pre-Programmed at the Factory with Calibration # 8-96Y Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
with Calibration # 8-96Y ID #(s) F8UF-AHA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 8-96Y ID #(s) F8UF-AHA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Correct VIN and OE Number required when ordering
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Engine Base: 5.4L 330ci V8 (3.55x4.17; 90.2x105.7);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Correct VIN and OE Number required when ordering All Calibrations with Module ID MLC-211 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
All Calibrations with Module ID MTC-101 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID MTC-101 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Engine Base: 6.8L 415ci V10 (3.55x4.16; 90.2x105.7);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID MTC-101 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID MTC-101 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
All Calibrations with Module ID DPC-405 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID DPC-405 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-405 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-405 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
All Calibrations with Module ID DPC-315 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID DPC-315 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-315 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-315 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
All Calibrations with Module ID DPC-415 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID DPC-415 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1998 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1998 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-415 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-415 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required