1996 Ford Econoline Super Duty Engine Control Module
Browse our online catalogue to find original replacement Engine Control Modules specifically designed to fit a 1996 Ford Econoline Super Duty.
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
ID #(s) F6TF-AJA with Calibration # 6-98B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F6TF-AJA with Calibration # 6-98B Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-98B ID #(s) F6TF-AJA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
with Calibration # 6-98B ID #(s) F6TF-AJA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
ID #(s) F6UF-NB with Calibration # 6-76A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F6UF-NB with Calibration # 6-76A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-76A ID #(s) F6UF-NB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
with Calibration # 6-76A ID #(s) F6UF-NB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
ID #(s) F6UF-RA with Calibration # 6-98E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F6UF-RA with Calibration # 6-98E Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
with Calibration # 6-98E ID #(s) F6UF-RA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
with Calibration # 6-98E ID #(s) F6UF-RA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-64K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-64K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-64K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-64K Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 6-64L Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 6-64L Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-64L Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-64L Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
ID #(s) F7TF-NA This Unit is Pre-Programmed at the Factory with Calibration # 6-76A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
ID #(s) F7TF-NA This Unit is Pre-Programmed at the Factory with Calibration # 6-76A Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
with Calibration # 6-76A ID #(s) F7TF-NA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 6-76A ID #(s) F7TF-NA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
All Calibrations with Module ID DPC-202 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID DPC-202 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-202 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-202 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
All Calibrations with Module ID DPC-203 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID DPC-203 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Engine Base: 7.3L 445ci V8 (4.11x4.18; 104.4x106.2);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-203 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID DPC-203 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
1996 Ford Econoline Super Duty Engine Control Module
Required Per Vehicle: 1
Fits: 1996 Ford Econoline Super Duty
Equipped With:
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Engine Base: 7.5L 460ci V8 (4.36x3.85; 110.7x97.8);
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML1-441 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required