1987 Ford Bronco Drive Shaft Assembly
Browse our online catalogue to find original replacement Drive Shaft Assemblies specifically designed to fit a 1987 Ford Bronco.
1987 Ford Bronco Drive Shaft Assembly
$582.47
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Rear
Required Per Vehicle: 1
Fits: 1987 Ford Bronco
Equipped With:
Transmission Control Type: Automatic;
Transmission Control Type: Automatic;
Vehicle Fitment Notes:
With 29 5/8" Prop Shaft
With 29 5/8" Prop Shaft
1987 Ford Bronco Drive Shaft Assembly
$603.87
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Rear
Required Per Vehicle: 1
Fits: 1987 Ford Bronco
Equipped With:
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Automatic;
Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Automatic;
Vehicle Fitment Notes:
With 28 5/8" Prop Shaft
With 28 5/8" Prop Shaft
1987 Ford Bronco Drive Shaft Assembly
$576.32
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
1987 Ford Bronco Drive Shaft Assembly
$380.47
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Front
Required Per Vehicle: 1
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD;
Drive Type: 4WD;
Vehicle Fitment Notes:
With 35 1/2" Prop Shaft
With 35 1/2" Prop Shaft
1987 Ford Bronco Drive Shaft Assembly
$590.84
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Rear
Required Per Vehicle: 1
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
With 26 1/2" Prop Shaft
With 26 1/2" Prop Shaft
1987 Ford Bronco Drive Shaft Assembly
$590.84
Limited Stock
Condition: New
Ships: Today, Feb. 16th
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Pick-Up: Ready in 2-4 Hours (Order before 3:00 PM)
Rear
Required Per Vehicle: 1
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Manual;
Vehicle Fitment Notes:
With 26 1/2" Prop Shaft
With 26 1/2" Prop Shaft
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 26.50" (673 mm) Long Driveshaft with 3.08 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 26.50" (673 mm) Long Driveshaft with 3.08 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 26.50" (673 mm) Long Driveshaft with 3.55 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 26.50" (673 mm) Long Driveshaft with 3.55 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 26.50" (673 mm) Long Driveshaft with 4.10 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 26.50" (673 mm) Long Driveshaft with 4.10 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 3.08 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.08 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 3.55 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.55 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 4.9L 4917cc 300ci L6 (4.00x3.98; 101.6x101.0); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 4.10 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 4.10 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 26.50" (673 mm) Long Driveshaft with 3.08 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 26.50" (673 mm) Long Driveshaft with 3.08 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 26.50" (673 mm) Long Driveshaft with 3.55 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 26.50" (673 mm) Long Driveshaft with 3.55 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 26.50" (673 mm) Long Driveshaft with 4.10 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 26.50" (673 mm) Long Driveshaft with 4.10 Axle Ratio Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 3.08 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.08 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 3.55 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.55 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$426.47
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Fuel Delivery Type: FI; Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 4.10 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 4.10 Axle Ratio with 26.50 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$539.65
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD;
Drive Type: 4WD;
Vehicle Fitment Notes:
with 35.51 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 35.51 (in) Long Driveshaft Obsolete Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$539.65
Out of Stock
Condition: New
Front
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD;
Drive Type: 4WD;
Vehicle Fitment Notes:
with 35.51" (902 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
with 35.51" (902 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Obsolete
1987 Ford Bronco Drive Shaft
$495.97
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Automatic; Transmission Code: C6;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Automatic; Transmission Code: C6;
Vehicle Fitment Notes:
with 3.50 Axle Ratio with 30.67 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.50 Axle Ratio with 30.67 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$495.97
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Automatic; Transmission Code: C6;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Automatic; Transmission Code: C6;
Vehicle Fitment Notes:
with 3.50 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.50 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$495.97
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 3.50 Axle Ratio with 30.67 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.50 Axle Ratio with 30.67 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$495.97
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.0L 302ci V8 (4.00x3.00; 101.6x76.2); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 3.50 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.50 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$495.97
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Control Type: Automatic; Transmission Code: C6;
Drive Type: 4WD; Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Control Type: Automatic; Transmission Code: C6;
Vehicle Fitment Notes:
with 3.50 Axle Ratio with 30.67 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.50 Axle Ratio with 30.67 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$495.97
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Control Type: Automatic; Transmission Code: C6;
Drive Type: 4WD; Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Control Type: Automatic; Transmission Code: C6;
Vehicle Fitment Notes:
with 3.50 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.50 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$495.97
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 3.50 Axle Ratio with 30.67 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.50 Axle Ratio with 30.67 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$495.97
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Control Type: Manual;
Drive Type: 4WD; Engine Base: 5.8L 5753cc 351ci V8 (4.00x3.50; 101.6x88.9); Transmission Control Type: Manual;
Vehicle Fitment Notes:
with 3.50 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
with 3.50 Axle Ratio with 30.67" (779 mm) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
1987 Ford Bronco Drive Shaft
$606.77
Out of Stock
Condition: New
Rear
Required Per Vehicle: 1
Made in USA
Fits: 1987 Ford Bronco
Equipped With:
Drive Type: 4WD; Transmission Control Type: Automatic; Transmission Code: AOD;
Drive Type: 4WD; Transmission Control Type: Automatic; Transmission Code: AOD;
Vehicle Fitment Notes:
w/3.55 Axle Ratio
w/3.55 Axle Ratio