A1 Cardone 18-4020 Disc Brake Caliper
Remanufactured Unloaded Caliper
$69.58 CAD
Core charge: $35.10
Limited Stock
Ships Today, May. 13th
Pick-Up Ready in 1 Hour (Order before 4:30 PM)
Brand: A1 Cardone
Stock #: 184020
Made in USA
UPC: 082617010641
Weight: 9.31 lb.(4.23 kg.)
Dimensions: 9.6" x 7.3" x 5.3" (24.3 cm x 18.4 cm x 13.3 cm)
Accepted Payments: Visa, MasterCard, PayPal
Buyer fitment guide only intended as reference. Please use catalogue search by vehicle to ensure proper fitment.
- NAPA Master Ride Chassis ES80684
- AutoZone ES80684
- MOOG Chassis Products EV80692
- TRW Steering and Suspension Parts JAR1184
- NAPA Chassis Parts 2693558
- Transbec TEV80692
- TRW Steering and Suspension Parts JAR1161
- NAPA Chassis Parts 2695628
- Transbec TEV80781
- MAS Industries TI90480
- Mcquay-Norris ES4518
- OEM Part Number 19133700
- AutoZone ES80781
- Deeza FOA611
- OEM Part Number 1FAA3224X
- OEM Part Number 1FBA3224X
- MOOG Chassis Products EV80789
- NAPA Chassis Parts 2693601
- MAS Industries TI85250
- MAS Industries TI85380
- OEM Part Number 1L5Z3280AA
- AutoZone ES4517
- Deeza FOA612
- MOOG Chassis Products EV80804
- MAS Industries TI86090
- MAS Industries TI85260
- Mcquay-Norris ES4410
- OEM Part Number 4R3Z3280A
- OEM Part Number 9R3Z32A0B
- Falcon EV80804
- Raybestos Chassis 4051187
- TRW Steering and Suspension Parts JAR1123
- MOOG EV80804
- Oldsmobile 18003761
- Pontiac 18003761
- Chevrolet 18005265
- Chevrolet 18012309
- Chevrolet 18015428
- Chevrolet 18020904
- Buick 18005265
- Buick 18012309
- Buick 18015428
- GMC 18015428
- Cadillac 18005265
- Cadillac 18012309
- Cadillac 18015428
- Oldsmobile 18005265
- Oldsmobile 18007946
- Oldsmobile 18012309
- Oldsmobile 18015428
- Pontiac 18005265
- Pontiac 18007946
- Pontiac 18012309
- Pontiac 18015428
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Mounting bracket is included where applicable for a hassle-free installation.
- New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- New stainless steel hardware clips and new mounting pins are included where applicable.
- New washers are included where applicable for a proper seal.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Pistons are durable, resistant to cracking or pitting and handle great loads.
- Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
- A plastic cap plug protects every brake port thread to ensure trouble-free installation.
- Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
| Bleeder Screw Cap Included | No |
| Rust Resistant Coating | Yes |
| Dust Boots Included | Yes |
| Bleeder Thread Size | M10x1.5 |
| Inlet Port Size | 10.00366 |
| Inlet Port Size | 0.394 |
| Product Condition | Remanufactured |
| Package Contents | Caliper; Instruction Sheet; Hardware Kit |
| Prop 65 | No |
| E-Waste | No |
| SDS Required | No |
| Contains Electronic Components? | No |
| Is item a chemical? | No |
| Is or contains a battery? | No |
| Is or contains a bulb? | No |
| Is the item CARB affected? | No |
| FAQ_Q1 | Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa? |
| FAA_A1 | Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations. |
| FAQ_Q2 | What type of fluid should I use: DOT 3, DOT 4, or DOT 5? |
| FAA_A2 | As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container. |
| FAQ_Q3 | Car pulls to one side during braking. Why? |
| FAA_A3 | Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
| FAQ_Q4 | Brakes squeal all of the time. What's causing the squeal? |
| FAA_A4 | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
| FAQ_Q5 | Could calipers be the cause of a low brake pedal? |
| FAA_A5 | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
| FAQ_Q6 | What type of grease is used on floating caliper mounting pins? |
| FAA_A6 | A silicone grease is used on floating caliper mounting pins. |
| FAQ_Q7 | Do all of your Calipers come with the new hardware and a mounting bracket for installation? |
| FAA_A7 | New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications. |
| UPC | 082617010641 |
| Origin Country: | US |
| Weight: | 9.31Lb. (4.23 kg.) |
| Package Dimensions: | 9.6" x 7.3" x 5.3" (24.3 cm x 18.4 cm x 13.3 cm) |
1 Year Warranty