Raybestos RC13606C Disc Brake Caliper

Raybestos R-Line Reman Semi-Loaded Coated Caliper & Bracket Assy

Call for Pricing

Brand: Raybestos

Stock #: RC13606C

Condition: New

Accepted Payments: Visa, MasterCard, PayPal

30-Day Return Policy

Raybestos Products use advanced technology to deliver proven performance.

Each Raybestos part is engineered, precision-machined and performance tested to meet or exceed the form, fit, and function of the vehicle's original manufacturer specifications. In fact, many Raybestos parts, represent a significant upgrade over the O.E. Specs.

Raybestos provides unparalleled coverage, and offers part numbers for all domestic and foreign car and trucks.

Buyer fitment guide only intended as reference. Please use catalogue search by vehicle to ensure proper fitment.

E-Waste	No
California Proposition 65	Y
Surface Finish	Coated
Bleeder Screw Thread	M10X1.00
Caliper Configuration	Friction Ready
Caliper Piston Diameter	63.4
Caliper Piston Diameter	2.496
Manufacturing Type	Remanufactured
Caliper Bracket Mounting Hole Size	12
Caliper Bracket Mounting Hole Thread Pitch	1.25
Bleeder Screw Cap Included	No
Dust Boots Included	Yes
Casting Number 1	A99 G# R MANDO
Caliper Bracket Surface Finish	Coated
Is Or Contains A Battery	No
Is Item A Chemical	No
Contains Electronic Components	No
Is Or Contains A Bulb	No
FAQ_Q1	Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAA_A1	Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturerâ€™s recommendations.
FAQ_Q2	What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAA_A2	As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQ_Q3	Car pulls to one side during braking. Why?
FAA_A3	Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQ_Q4	Brakes squeal all of the time. What's causing the squeal?
FAA_A4	Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQ_Q5	Could calipers be the cause of a low brake pedal?
FAA_A5	A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQ_Q6	What type of grease is used on floating caliper mounting pins?
FAA_A6	A silicone grease is used on floating caliper mounting pins.
FAQ_Q7	Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAA_A7	New hardware and Brackets are included with all of our Calipers when applicable. Mounting bracket inclusion is dependant on the application. Mounting Brackets are also sold separately for most applications.
Does it Require SDS	No
Is Prop Sixty Five Affected	Yes
Is the item CARB affected	No
Origin Country:	MX