LuK DMF109 Clutch Flywheel
LuK DMF Manu
$1,150.56
Out of Stock
Brand: LuK
Stock #: DMF109
Condition: New
UPC: 00670774200939
Weight: 26.11 lbs (11.87 kg)
Accepted Payments: Visa, MasterCard, PayPal
Buyer fitment guide only intended as reference. Please use catalogue search by vehicle to ensure proper fitment.
- Perfection Clutch NA
- Sachs NA
- LuK 4150426100
- OEM Part Number 2326030
- AMS 167509
- NAPA Clutch and Flywheel NDMF109
- Hyundai 23260-3E001
- A Luk DMF absorbs engine vibrations and torque spikes, preventing damage to the gearbox.Â
- A Luk dual mass flywheel (DMF) leads to less Bending Stress on the engines crankshaft.
- A Luk dual mass flywheel (DMF) leads to less vibration going to the Clutch Pedal.
- A Luk dual mass flywheel (DMF) reliably dampens torsional vibrations in the powertrain and increases driver and passenger comfort.
- A Luk dual mass flywheel dampens torsional vibrations in the powertrain and ensures driving comfort in all speed ranges. Matched to the each vehicle, the DMF enables low-speed driving and ensures lower fuel consumption and emissions.
- Over 30 years ago, Schaeffler engineers under the LuK product brand developed a revolutionary technology for damping torsional vibrations in the drivetrain : the dual mass flywheel (DMF). Unlike a conventional flywheel, the DMF consists of two masses which are mounted to rotate against each other. A damping system in the form of arc springs is integrated into the DMF. Thus, it absorbs the torsional vibrations of the engine almost completely.
| Bolt Hole Pattern | 2 |
| Cup depth, secondary flywheel | -.472 |
| Cup depth, secondary flywheel | -12 |
| Ring Gear To Friction Surface | 1.579 |
| Ring Gear To Friction Surface | 40.1 |
| Flywheel Thickness [mm] | 1.587 |
| Flywheel Thickness [mm] | 40.3 |
| I.D. for Pilot | 1.370 |
| I.D. for Pilot | 34.8 |
| Flywheel friction surface outer diameter | 9.331 |
| Flywheel friction surface outer diameter | 237 |
| Torque Capacity DMFW | 11.024 |
| Torque Capacity DMFW | 280 |
| Ring Gear Major Dia. | 11.000 |
| Ring Gear Major Dia. | 279.4 |
| Crank To Friction Surface | 1.453 |
| Crank To Friction Surface | 36.9 |
| Dowel Hole Pattern | 5 |
| Crank Hole Dia. | .413 |
| Crank Hole Dia. | 10.5 |
| Overall Casting O.D. | 11.339 |
| Overall Casting O.D. | 288 |
| Ring Gear Number | L-09180-0082-03 |
| Centering diameter / dowel hole | 10.236 |
| Centering diameter / dowel hole | 260 |
| Bolt hole PCD crankshaft | 2.874 |
| Bolt hole PCD crankshaft | 73 |
| Ring Gear Thickness | 3.937 |
| Ring Gear Thickness | 100 |
| Flywheel Friction Surface Inner diameter | 5.906 |
| Flywheel Friction Surface Inner diameter | 150 |
| Ring Gear Mounting O.D. | 101.181 |
| Ring Gear Mounting O.D. | 2570 |
| Bolt hole PCD clutch pres.plte | 10.236 |
| Bolt hole PCD clutch pres.plte | 260 |
| Dowel hole diameter | .236 |
| Dowel hole diameter | 6 |
| Number of teeth, starter ring gear | 110 |
| UPC | 00670774200939 |
| Origin Country: | HU |
| Weight: | 26.11 lbs (11.87 kg) |
| Package Length: | 14.9" (37.8 cm) |
| Package Width: | 16.9" (42.9 cm) |
| Package Height: | 3.9" (9.8 cm) |
1 Year Warranty