LuK DMF057 Clutch Flywheel
LuK DMF Manu
$736.08
Out of Stock
Brand: LuK
Stock #: DMF057
Condition: New
UPC: 00670774097744
Weight: 25.58 lbs (11.63 kg)
Accepted Payments: Visa, MasterCard, PayPal
Buyer fitment guide only intended as reference. Please use catalogue search by vehicle to ensure proper fitment.
- Perfection Clutch NA
- LuK 4150195100
- Sachs DMF91142
- Perfection Clutch 50-2813
- OEM Part Number 022105266L
- AMS 167171
- NAPA Clutch and Flywheel NDMF057
- Volkswagen 022 105 266 L
- Audi 022 105 266 L
- A Luk DMF absorbs engine vibrations and torque spikes, preventing damage to the gearbox.Â
- A Luk dual mass flywheel (DMF) leads to less Bending Stress on the engines crankshaft.
- A Luk dual mass flywheel (DMF) leads to less vibration going to the Clutch Pedal.
- A Luk dual mass flywheel (DMF) reliably dampens torsional vibrations in the powertrain and increases driver and passenger comfort.
- A Luk dual mass flywheel dampens torsional vibrations in the powertrain and ensures driving comfort in all speed ranges. Matched to the each vehicle, the DMF enables low-speed driving and ensures lower fuel consumption and emissions.
- Over 30 years ago, Schaeffler engineers under the LuK product brand developed a revolutionary technology for damping torsional vibrations in the drivetrain : the dual mass flywheel (DMF). Unlike a conventional flywheel, the DMF consists of two masses which are mounted to rotate against each other. A damping system in the form of arc springs is integrated into the DMF. Thus, it absorbs the torsional vibrations of the engine almost completely.
| Bolt Hole Pattern | 2 |
| Cup depth, secondary flywheel | -.236 |
| Cup depth, secondary flywheel | -6 |
| Ring Gear To Friction Surface | .512 |
| Ring Gear To Friction Surface | 13 |
| Flywheel Thickness [mm] | 2.504 |
| Flywheel Thickness [mm] | 63.6 |
| I.D. for Pilot | 1.087 |
| I.D. for Pilot | 27.6 |
| Flywheel friction surface outer diameter | 9.488 |
| Flywheel friction surface outer diameter | 241 |
| Torque Capacity DMFW | 16.732 |
| Torque Capacity DMFW | 425 |
| Ring Gear Major Dia. | 11.392 |
| Ring Gear Major Dia. | 289.366 |
| Crank To Friction Surface | 1.437 |
| Crank To Friction Surface | 36.5 |
| Dowel Hole Pattern | 2 |
| Crank Hole Dia. | .413 |
| Crank Hole Dia. | 10.5 |
| Overall Casting O.D. | 11.339 |
| Overall Casting O.D. | 288 |
| Ring Gear Number | L-09180-0048-01 |
| Centering diameter / dowel hole | 10.315 |
| Centering diameter / dowel hole | 262 |
| Bolt hole PCD crankshaft | 2.677 |
| Bolt hole PCD crankshaft | 68 |
| Ring Gear Thickness | .394 |
| Ring Gear Thickness | 10 |
| Flywheel Friction Surface Inner diameter | 6.063 |
| Flywheel Friction Surface Inner diameter | 154 |
| Ring Gear Mounting O.D. | 10.427 |
| Ring Gear Mounting O.D. | 264.85 |
| Bolt hole PCD clutch pres.plte | 10.157 |
| Bolt hole PCD clutch pres.plte | 258 |
| Dowel hole diameter | .197 |
| Dowel hole diameter | 5 |
| Number of teeth, starter ring gear | 135 |
| UPC | 00670774097744 |
| Origin Country: | HU |
| Weight: | 25.58 lbs (11.63 kg) |
| Package Length: | 14.9" (37.8 cm) |
| Package Width: | 16.9" (42.9 cm) |
| Package Height: | 3.9" (9.8 cm) |
1 Year Warranty