Name: A1 Cardone 60-3002 CV Axle Shaft
Brand: A1 Cardone
SKU: a1-cardone-603002
Price: 126.34 CAD
Availability: OutOfStock

Buyer fitment guide only intended as reference. Please use catalogue search by vehicle to ensure proper fitment.

Chrysler 4137867
Chrysler 4346883
Chrysler 4346885
Chrysler 4367031
Chrysler 4367435
Chrysler 4367757
Chrysler 4367884
Chrysler 4367885
Chrysler 4384721
Chrysler 4384867
Chrysler 4505769
Chrysler 4505775
Chrysler 4505876
Chrysler 4505885
Chrysler 4505921
Chrysler 4505936
Chrysler 4505983
Chrysler 4511413
Chrysler 4511429
Chrysler 4539411
Chrysler 4539429
Chrysler 4545370
Chrysler 4545415
Chrysler 4545417
Chrysler 4545419
Chrysler 4545430
Chrysler 4641294
Chrysler 4641523
Chrysler 4641671
Chrysler 4641696
Chrysler 4641742
Chrysler 4660201
Dodge 4137863
Dodge 4137867
Dodge 4346883
Dodge 4346885
Dodge 4367031
Dodge 4367435
Dodge 4367757
Dodge 4367884
Dodge 4367885
Dodge 4384721
Dodge 4384863
Dodge 4384867
Dodge 4505769
Dodge 4505775
Dodge 4505876
Dodge 4505885
Dodge 4505921
Dodge 4505936
Dodge 4505983
Dodge 4511413
Dodge 4511429
Dodge 4539411
Dodge 4539429
Dodge 4539471
Dodge 4545372
Dodge 4545415
Dodge 4641294
Dodge 4641523
Dodge 4641671
Dodge 4641696
Dodge 4641742
Dodge 4660201
Dodge 5212891
Dodge 5212913
Plymouth 4137863
Plymouth 4137867
Plymouth 4346883
Plymouth 4346885
Plymouth 4367031
Plymouth 4367757
Plymouth 4367884
Plymouth 4367885
Plymouth 4384863
Plymouth 4384867
Plymouth 4505769
Plymouth 4505775
Plymouth 4505876
Plymouth 4505885
Plymouth 4505921
Plymouth 4505936
Plymouth 4505983
Plymouth 4511413
Plymouth 4511429
Plymouth 4539411
Plymouth 4539429
Plymouth 4539471
Plymouth 4545415
Plymouth 4641294
Plymouth 4641523
Plymouth 4641671
Plymouth 4641696
Plymouth 4641742
Plymouth 4660201
Plymouth 4728457
Plymouth 5212763

As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
CV Drive Axle is measured after assembly to ensure proper fit.
CV Drive Axle shafts are inspected for run out to prevent vibration.
High-quality grease withstands high-temperature and pressure extremes, which extends joint life.
High-tech grinding machines maintain the original design of the outer housing, race and cage to guarantee reliable performance.
Neoprene boots ensure excellent environmental stress resistance, which eliminates cracking - a leading cause of boot failure.
Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles.
Threads are chased to ensure proper fit of the new retaining nut supplied with each CV Drive axle.
CARDONE has extensive experience in remanufacturing CV Drive Axles €“ we've spent over three decades re-engineering materials and processes to arrive at a superior, longer-lasting product. Our proprietary pneumatic clamping machines create a perfect seal between the boot and housing, creating a water-tight seal. The perfect geometry of the ball groove is maintaine d to allow for proper grease flow, significantly increasing longevity. Additionally, all CV Drive Axle shafts are individually verified for straightness, resulting in vibration-free performance at all speeds.

Other Names: CV Axle Assembly, CV Axle Shaft

Package Contents	Complete Axle; Instruction Sheet
Product Condition	Remanufactured
E-Waste	No
Prop 65	No
SDS Required	No
Contains Electronic Components?	No
Is item a chemical?	No
Is or contains a battery?	No
Is or contains a bulb?	No
Is the item CARB affected?	No
FAQ_Q1	Are the CV Drive Axle shafts balanced at the factory?
FAA_A1	Shafts are inspected 100% for run out to prevent vibrations. Only shafts that meet the specifications for run out are utilized in the remanufacturing of a CV Drive Axle assembly.
FAQ_Q2	I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?
FAA_A2	When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.
FAQ_Q3	When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?
FAA_A3	The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.
FAQ_Q4	When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?
FAA_A4	The most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up.
FAQ_Q5	I hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this?
FAA_A5	The most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint.
FAQ_Q6	I removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do?
FAA_A6	The transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time.
FAQ_Q7	The old CV Drive Axle has a locking style (prevailing torque) nut. Should I reuse it?
FAA_A7	NO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one.
FAQ_Q8	The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it?
FAA_A8	Always use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly.
FAQ_Q9	Is it OK to use an impact hammer to install the retaining nut?
FAA_A9	Never use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications.
FAQ_Q10	When I replace the CV drive axles, should I reuse the old seals?
FAA_A10	When replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking.
FAQ_Q11	Can I let the CV Drive Axles hang while I am working on the car?
FAA_A11	Never allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint.
FAQ_Q12	The wheels wobble when I make a turn. What's the problem?
FAA_A12	The most likely cause is a broken bearing cage due to excessive torque load. This is typically an outboard joint problem.
UPC	082617483766
Origin Country:	MX
Weight:	18 lbs (8.19 kg)
Package Length:	29.5" (74.9 cm)
Package Width:	5" (12.7 cm)
Package Height:	5" (12.7 cm)

1 Year Warranty

A1 Cardone 60-3002 CV Axle Shaft

Remanufactured CV Axle Assembly