| Product Condition | Remanufactured |
| FAQs | Do I need to replace the engine oil at regular intervals? |
| FAQs | Yes, most turbocharger failures are caused by oil starvation from old or contaminated oil. |
| FAQs | Can the turbocharger fail if a foreign object is sucked in? |
| FAQs | Yes, replacing the air filter and cleaning entire air and exhaust system will prevent damage to the fragile blades on the turbocharger wheels. |
| FAQs | Do I need to let the engine cool off before shutting down? |
| FAQs | Yes, cutting off the supply of fresh oil to a hot turbocharger can cause oil coking. |
| FAQs | Do your aftermarket turbochargers meet emission regulations? |
| FAQs | Yes, all turbochargers are engineered to match O.E. performance and comply with all federal regulations. |
| Features and Benefits | All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation. |
| Features and Benefits | Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment. |
| Features and Benefits | All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards. |
| Features and Benefits | 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit. |
| Features and Benefits | Each unit comes with a pre-lube syringe to ensure product protection during installation. |
| Features and Benefits | As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit. |
| Features and Benefits | Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. |
| Package Contents | Turbocharger; Gaskets; Studs; Syringe; Instruction Sheet |
| Turbocharger Cooling Method | Coolant |
| Wastegate Actuator Included | Yes |
| E-Waste | No |
| Mounting Bracket Included | No |
| Mounting Hardware Included | No |
| Material | Steel; Aluminum |
| Bearing Type | Journal |
| UPC | 884548134515 |
| Origin Country: | US |
| Weight: | 31 lbs (14.1 kg) |
| Package Length: | 14.4" (36.5 cm) |
| Package Width: | 15.3" (38.7 cm) |
| Package Height: | 12.9" (32.7 cm) |
