A1 Cardone 1H-72008 Power Steering Pump in Canada

Buyer fitment guide only intended as reference. Please use catalogue search by vehicle to ensure proper fitment.

Nissan 491104RA5A

All units are built with 100% new, O.E.-quality O-rings, seals, bearings and gaskets.
Shafts and surfaces are machined to precise specifications to eliminate premature wear and extend product life.
To ensure reliable performance, final assembly is computer-tested to measure pressure, bypass, fluid flow, steering effort, current and noise.
Weak solder points are 100% reflowed to extend life expectancy.
CARDONE remanufactured Electrohydraulic Power Steering Pumps (EHPS) are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
All critical components (cam packs, armature, reservoir, etc.) are tested to match O.E. performance standards.
During the engineering phase, every unit is tested to ensure perfect fit and function on the vehicle.

Housing Material	Aluminum; Plastic
Package Contents	Electronic Hydraulic Power Steering Pump; Sealing Kit
Product Condition	Remanufactured
E-Waste	Yes
Prop 65	No
SDS Required	No
Contains Electronic Components?	Circuit Board
Is item a chemical?	No
Is or contains a battery?	No
Is or contains a bulb?	No
Is the item CARB affected?	No
FAQ_Q1	Why use EHPS pumps over the traditional belt driven power steering pumps?
FAA_A1	Automobile manufacturers are favoring EHPS pumps because they result in better performance and fuel economy. EHPS pumps eliminate the belt and pulley rotational mass that a traditional pump would require.
FAQ_Q2	What does an EHPS pump consist of?
FAA_A2	An EHPS pump consists of an electronic motor and a hydraulic pump. The electronic motor generates the required RPMs for the pump to produce flow and pressure to supply the power steering system.
FAQ_Q3	Can an EHPS pump be serviced?
FAA_A3	Most automobile manufactures do not recommend servicing individual components of an EHPS pump. These pumps are replaced as complete units.
FAQ_Q4	What is needed for an EHPS pump to function?
FAA_A4	Unlike traditional power steering pumps, the EHPS pumps require a 12-volt power supply. Most EHPS pumps will also require communication with an external module.
FAQ_Q5	Can regular power steering fluid be used for EHPS systems?
FAA_A5	No. You must use the correct fluid specified in the O.E. service manual or ownerâ€™s manual of the vehicle being serviced.
FAQ_Q6	Where is an EHPS pump usually located?
FAA_A6	An EHPS pump has a different appearance than a traditional power steering pump and is usually mounted on the passenger side behind the front bumper.
FAQ_Q7	Will the power steering fluid need to be flushed?
FAA_A7	Yes. The hydraulic system must be flushed according to the O.E. service intervals. Failure do to so can cause premature damage to the EHPS pump and other power steering components.
FAQ_Q8	Will the system need to be bled after replacing an EHPS pump?
FAA_A8	Yes, a bleeding procedure must be performed, just like a traditional belt-driven power steering system.
UPC	00884548334946
Origin Country:	MX
Weight:	13.09 lbs (5.95 kg)
Package Length:	18.3" (46.4 cm)
Package Width:	8.3" (21 cm)
Package Height:	6.5" (16.5 cm)

1 Year Warranty

A1 Cardone 1H-72008 Power Steering Pump

Remanufactured Power Steering Pump