A1 Cardone 12-17245 ABS Control Module in Canada

Buyer fitment guide only intended as reference. Please use catalogue search by vehicle to ensure proper fitment.

Ford 8L1T2C219DB
Ford 8L1Z2C219D
Lincoln 8L1T2C219DB
Lincoln 8L1Z2C219D

CARDONE Remanufactured ABS Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design flaws. Every CARDONE unit goes through stringent testing, ensuring like-new performance and quick reaction time when traction control is required.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
100% computer testing ensures consistent performance.
Air-decay testing ensures unit is void of brake fluid.
Critical components are re-soldered, where necessary, to ensure superior electrical connections, eliminate intermittent failures and extend product life.
High-pressure hydraulic testing ensures zero leakage.
On-car testing is done, when necessary, for validation of product reliability.
Worn-out, missing or non-functioning components are replaced with new or rebuilt components, where necessary.

Package Contents	Module; Instruction Sheet
Product Condition	Remanufactured
Prop 65	No
E-Waste	Yes
SDS Required	No
Is item a chemical?	No
Is or contains a battery?	No
Is or contains a bulb?	No
Is the item CARB affected?	No
Contains Electronic Components?	Circuit Board
FAQ_Q1	What is ABS?
FAA_A1	ABS stands for anti-lock braking system. ABS reduces the risk of skidding by maintaining traction in an evasive or abrupt braking situation. ABS can also be an integral part of a vehicleâ€™s electronic stability control system.
FAQ_Q2	What are the most common causes of ABS problems in general?
FAA_A2	Wheel speed sensors that become contaminated with debris from the road or braking system and sensor wiring that becomes damaged can result in intermittent or no feedback signals to the ABS control module.
FAQ_Q3	What is the ABS Control Module and how does it function?
FAA_A3	The ABS control module is a microprocessor that runs diagnostic checks of a vehicleâ€™s antilock braking system. The diagnostics processes information from wheel-speed sensors and the hydraulic brake system to determine when to release braking pressure on a wheel that is about to lock up and start skidding.
FAQ_Q4	What are the most common causes of failure for the ABS Control Module?
FAA_A4	Road debris, salt and water intrusion are the most common causes of failure for the ABS control module.
FAQ_Q5	Is there another name for â€œABS Control Moduleâ€?
FAA_A5	The ABS Control Module is also known as an Electronic Brake Control Module or Skid Control ECU. If the vehicle is equipped with traction control, the microprocessor may also be called the Electronic Brake Traction Control Module (EBTCM).
FAQ_Q6	Will I get a light on the instrument panel if thereâ€™s a problem with the ABS Control Module?
FAA_A6	The Instrument Panel Cluster (IPC) illuminates the ABS indicator when the ABS control module detects an ABS-disabling malfunction. This is done when the IPC receives a Class 2 message from the ABS control module requesting illumination. The IPC will also illuminate the ABS indicator when it detects a loss of Class 2 communications with the ABS control module.
UPC	00884548298408
Origin Country:	MX
Weight:	1.65 lbs (0.75 kg)
Package Length:	5.5" (14 cm)
Package Width:	4.6" (11.8 cm)
Package Height:	7.4" (18.7 cm)

1 Year Warranty

A1 Cardone 12-17245 ABS Control Module

Remanufactured ABS Control Module