1999 Ford Taurus Engine Control Modules
Save up to 40% on original replacement 1999 Ford Taurus Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 1999 Ford Taurus.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9LAA-AA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9LAA-AA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
with Calibration # 9LAA-AA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9LAA-AA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9LAA-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9LAA-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
with Calibration # 9LAA-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9LAA-AB Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9LAA-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9LAA-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
with Calibration # 9LAA-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9LAA-BA Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9LAA-BN Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9LAA-BN Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
with Calibration # 9LAA-BN Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9LAA-BN Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
This Unit is Pre-Programmed at the Factory with Calibration # 9LAA-BS Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
This Unit is Pre-Programmed at the Factory with Calibration # 9LAA-BS Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
with Calibration # 9LAA-BS Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
with Calibration # 9LAA-BS Emission Calibration / Tear Tag on Front Door Jams, in Trunk, or Under Hood This Unit is Pre-Programmed at the Factory
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: GAS; Valves: 24;
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: GAS; Valves: 24;
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-487 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-487 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: GAS; Valves: 24;
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: GAS; Valves: 24;
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-487 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-487 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-487 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-487 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-487 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-487 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-862 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-862 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: GAS; Valves: 12;
Vehicle Fitment Notes:
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-862 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-862 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
Engine Control Module
$176.42
Out of Stock
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: GAS; Valves: 24;
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: GAS; Valves: 24;
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-863 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID ML2-863 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
$176.42
Out of Stock
Condition: New
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: GAS; Valves: 24;
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5); Fuel Type: GAS; Valves: 24;
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-863 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID ML2-863 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.4L 207ci V8 (3.24x3.13; 82.4x75.9);
Engine Base: 3.4L 207ci V8 (3.24x3.13; 82.4x75.9);
Vehicle Fitment Notes:
All Calibrations with Module ID MLC-371 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
All Calibrations with Module ID MLC-371 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.4L 207ci V8 (3.24x3.13; 82.4x75.9);
Engine Base: 3.4L 207ci V8 (3.24x3.13; 82.4x75.9);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLC-371 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Correct VIN and OE Number required when ordering All Calibrations with Module ID MLC-371 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: FLEX;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: FLEX;
Vehicle Fitment Notes:
All Calibrations with Module ID ML2-861 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required PATS Module Requires Programming after ECM Install.
All Calibrations with Module ID ML2-861 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required PATS Module Requires Programming after ECM Install.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: FLEX;
Engine Base: 3.0L 2986cc 182ci V6 (3.5039x3.1496; 89.0x80.0); Fuel Type: FLEX;
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. All Calibrations with Module ID ML2-861 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required
PATS Module Requires Programming after ECM Install. All Calibrations with Module ID ML2-861 Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required