2007 Ford Fusion Engine Control Modules
Save up to 40% on original replacement 2007 Ford Fusion Engine Control Modules. Navigate our online catalogue to find Engine Control Modules and other parts designed specifically to fit a 2007 Ford Fusion.
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5621 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5621 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5621 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5621 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5622 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5622 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5622 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5622 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5623 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5623 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5623 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5623 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5624 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5624 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5624 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5624 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5626 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5626 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5626 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5626 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5721 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5721 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5721 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5721 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5722 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5722 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5722 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5722 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5723 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5723 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5723 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5723 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5724 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5724 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Engine Base: 2.3L 140ci L4 (3.44x3.70; 87.4x94.0);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5724 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5724 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Vehicle Fitment Notes:
All Calibrations with Module ID MG2-E5725 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
All Calibrations with Module ID MG2-E5725 Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering
Engine Control Module
Condition: Remanufactured
Required Per Vehicle: 1
Required Per Vehicle: 1
Vehicle fitment:
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Engine Base: 3.0L 2968cc 181ci V6 (3.5039x3.1299; 89.0x79.5);
Vehicle Fitment Notes:
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5725 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored
PATS Module Requires Programming after ECM Install. Important: Vehicle Specific Flash Programming Required ON the Vehicle Correct VIN and OE Number required when ordering All Calibrations with Module ID MG2-E5725 Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues Per Ford TSB 14-0059 , replace any ignition Coil-On-Plugs (COP) and Spark Plugs associated with diagnostic trouble codes before replacing the Powertrain Control Module (PCM). Proof of replacement is required for the Powertrain Control Module (PCM) warranty to be honored